Recent content by Skywalker

I bought one of these cheapo X-Dart quads from HobbyKing($19) and didn't realize it was a Mode 1 (throttle on the right). Since I have no intention of learning Mode 1, I decided to tear the transmitter apart. The Mode 2(throttle on the left) hack was actually fairly easy. This does require some...

Oh, Never mind. I found it in the hardware menu. Thanks again.

Thank you for your reply. How do you get to the radio calibration screen without going through the setup steps?

Hello, Quick question. My RX on my quad lost the AILE channel. I tested it with a servo to make sure,and it has a bad connection on the board. I tried to re-solder the pin, but I think it is a crack or something on the board. Anyway, I ordered a new RX. When I hook up the new RX, can i just bind...

Thank you for the input. Are the parameters you are referring to the PWM (max%) adjustment? I have been able to get a lot of the shakes out, but still have some. I have seen some extremely stable gopro gimbal video's. That is what I am trying for. Here is one of my latest test flights. Any...

That is a good idea. I will give it a shot. I previously had the gopro mounted on the middle of the frame, with a vibration dampener. It was very smooth, vibration free and no jello. This morning I tried again with no modifications to the rubber dampeners, and I changed some of the settings...

Great idea jes1111! I tried testing again last evening. I tried zipping a zip tie around each rubber grommet to stiffen it up. The results were about the same. I uploaded a video showing my issue. If you fast forward to about 20sec or so you can really see the shake on the horizon. I will try...

Ok, so my gimbal has 4 holes and 4 dampeners, so I can't add any. I shoved some high density foam inside the dampeners, and did a test. It really seemed to make a difference, although it was super windy. The dampeners I have are black. Any suggestion on where to get some stiffer ones? Are they a...

Hello, I have one of those el'cheapo gopro gimbals from goodluck buy, with a martinez board. I have spent numerous hours tuning, balancing etc. I have balanced props, and an extremely stable F550/DJI Naza setup. I am having a very annoying slight jitter problem when I fly. One thing to mention...

I have a minimOSD and Leah-6H. I want to create a system with a dedicated GPS antenna for my OSD. Any suggestions or tutorials on this? I basically just want GPS coordinates and voltage displayed.

Thanks for the awesome videos. I am using the Naza M v2. I have an arduino based OSD(MinimOSD), and am reading up on some hacks to use the Naza GPS. Has anyone tried this? Any success?

I looked at that EZOSD, it looks really nice. I already have a tx and rx that works well, so I was kinda looking for something a bit simpler and less $$.

I bought one of those cheapo HK osd's($24) It came with an old GPS antenna marked 7/27/2004... I got it to lock one time, and the coordinates were 10 miles away! Has anyone had any success using a better GPS on one of these? I tried a LEA-6H and I didn't have any success. Im wondering if the...

Oh wow, great info. Does it matter how high the throttle is saved?