Search results

My home made Brushless Gimbal. Made from cutting up 50x30x2mm Aluminium rectangle tubing. The unique feature on this gimbal is the wire rope can be easily removed. And consists of a single loop of wire. This wire rope can there for be easily changed for a different length, in order to get the...

On this build i wanted to make it as small as possible and still be able to lift the the Gopro camera, And have no propellers in view looking straight ahead. And Integrate a "Wire Rope Isolator" mount, for the Gopro Camera. Motor to Motor is 320mm. Flight controller: Dji Naza Motors: Turnigy...

Another DIY project I've been working on: On this build I wanted to move the battery to the top for better balance. And make the arms skinnier, for better efficiency. Also to see if I could make it lighter. Using: "Connect It" components from www.rcr.com.au, for the main body and 15mm "Quad"...

Another Build. Using: 20x20mm Aluminium Square Tubbing, cut into 27cm lengths. and 3mm Plywood, cut into a hexagonal shape. Hardware: DJI Naza Flight Controller Turnigy NTM 28-26 1200kv motors. 18a ESC. Gemfan 9x4.7 Propellers. Zippy Compact 3s 4000mah 25c battery. Frame Weight: 480grams...

Thought I would have a tinker with Wire Rope Isolators. After a number of prototypes this is what I have come up with so far. Using: 1x 40mm PVC pipe cap. Cut down to 1cm. 1x 50mm PVC pipe cap. Cut down to 1cm. 1x length of 1.1mm Wire Rope. The same cable they use on bikes for changing gears...

I given up on this frame for now. Didn't like its flight characteristics. wasn't symmetrical enough. Concentrating on this build. After making a PVC Quadcopter and a PVC Octocopter. Now for a PVC Hexacopter. Made from: (1/2inch) PVC adapters and pipe. And Using: Rabbit Flight Control...

Another DIY project I have been working on. Using: 8x PVC Wyes 1/2 inch Adapters. And PVC 1/2 inch Pipe for the Arms. FCB: Rabbit Flight Controller Motors: Turnigy NTM 28-26 1200kv ESC: Turnigy Plush 25 Amp. Propellers: Gemfan 9x4.7 Battery: Zippy Flightmax 3s 5000mah 20c Total Flight...

My new PVC T-QUAD design. AN UPDATED VERSION ON PAGE 3 My aim on this build was eliminate the propellers from the gopro's field of view. And to have a central mass for better stability. Total cost for the frame would be under $20. DJI Naza flight controller Gemfan 9x4.7 props (himodel.com)...

Hello All. Would like to share with you my home built FPV Quad Frame. My prime objective was for it to be: A. Cheap B. Strong C. Fun After my 3rd prototype this is what I have come up with. Home made Quad with 15mm PVC pipe and connections. Frame weight just under 400grams Total cost...