Matts DIY Mini H-Quad for Gopro

mattsPVC

Member
On this build i wanted to make it as small as possible and still be able to lift the the Gopro camera, And have no propellers in view looking straight ahead.
And Integrate a "Wire Rope Isolator" mount, for the Gopro Camera.

Motor to Motor is 320mm.

Flight controller: Dji Naza
Motors: Turnigy NTM 26-28 1200kv
ESC: CarbonBird 18amp
Propellers: Gemfan 8x4.5 carbon/nylon mix
Battery: Zippy Compact 3s 25c 4000mah

AUW: 1290grams
Flight Time: 11 minutes
Hover: Approx 60% throttle

So far pretty happy.




View attachment 8054 View attachment 8055 View attachment 8056 View attachment 8057 View attachment 8058 View attachment 8059 View attachment 8060 View attachment 8061 View attachment 8062 View attachment 8063 View attachment 8064 View attachment 8065 View attachment 8066 View attachment 8067 View attachment 8068 View attachment 8069 View attachment 8070
 

Attachments

  • P1010527.jpg
    P1010527.jpg
    147.4 KB · Views: 2,546
  • P1010529.jpg
    P1010529.jpg
    149.9 KB · Views: 2,568
  • P1010530.jpg
    P1010530.jpg
    137.9 KB · Views: 365
  • P1010532.jpg
    P1010532.jpg
    151.1 KB · Views: 373
  • P1010534.jpg
    P1010534.jpg
    142 KB · Views: 378
  • P1010535.jpg
    P1010535.jpg
    149.1 KB · Views: 368
  • P1010536.jpg
    P1010536.jpg
    149.2 KB · Views: 810
  • P1010537.jpg
    P1010537.jpg
    145.9 KB · Views: 626
  • P1010538.jpg
    P1010538.jpg
    151.5 KB · Views: 612
  • P1010539.jpg
    P1010539.jpg
    151.1 KB · Views: 637
  • P1010540.jpg
    P1010540.jpg
    144.7 KB · Views: 615
  • P1010541.jpg
    P1010541.jpg
    149.4 KB · Views: 606
  • P1010542.jpg
    P1010542.jpg
    146.4 KB · Views: 674
  • P1010543.jpg
    P1010543.jpg
    147.9 KB · Views: 691
  • P1010544.jpg
    P1010544.jpg
    147.2 KB · Views: 654
  • P1010545.jpg
    P1010545.jpg
    143.6 KB · Views: 702
  • P1010546.jpg
    P1010546.jpg
    142.4 KB · Views: 700
Last edited by a moderator:

Top