Search results

OK I HAVE TO GET SHUT. I just have toooo many copters. So for sale XMX3 WKM Axi Jeti esc's XM6 WKM Axi Jeti esc's DJI450 WKM GoPro Zen Spektrum AR8000, TM1000 telemetry volts temp altitude Tiger Motors DJI450 WKM FPV machine Spektrum AR8000, TM1000 telemetry volts temp altitude Tiger...

So now I have stripped the A2 peice of junk of this bird what do I make. I do really need to sell it at as I just cant justify having another Y6. It will be WKM with Jeti 40amp Mulit ESC's. AXi motors I will come in under the 7Kg limit. I would even consider selling it as is, all ready for...

WTF is this going to encourage then... http://edm.dji.com/FIFA/eDM_FIFA1.html FAA case closed.

I feel a bit like that guy in the old western I used to watch 'Branded' I think it was called. Because of my continued extensive testing and honest reporting of DJI products such as the A2 and LightBridge I have had my sword broken in shame I guess because the sites major sponsor / owner does...

The latest Information notice document from the CAA mentions checking the airwaves for possible interference that may cause loss of aircraft control with a spectrum analyser. Is this practical, possible, if so what should be used? Dave 'Radio Frequency (RF) interference. Pilots should...

So just committed more time of my life beta testing A2 firmware 2.3 Cararpu says its working good for him on a F550. Would be nice to see some pics and video. I have just upgraded ALL and all that has upgraded is the FC, everything else has stayed the same. Is that just me or is that...

I am sure I saw a post on here about flight recording software. anyone link me to it Ta Dave

OK more DJI wows! I have installed a iODS MKII and everything works via AV1 for the GoPro so I installed a small FPV cam into AV2 but cant get at AV2 via the switch. In the instructions it says you can choose either AV1 or AV2 as default channels but I see no option to do this or am I just...

So 2.2 is released with its very carefully worded releace notes.. Just waiting for GoPro to charge (another bugbear) and Ill do it on camera from start to finish...that if the GoPro Battery will last that long! Chocks away I have nothing to loose now just my time! Dave

Just had chat with CAA. Everyone operating in UK should read this.. especially the last couple of paragraphs. Its going to get harder and more expensive to operate. http://www.caa.co.uk/docs/33/InformationNotice2014081.pdf Dave

I have to reduce my fleet of mulits and I have a few for sale. The first one will be my spare VMX3HL Offer over £3500 with AXI motors, WKM, AV130 with Radian control, quick release landing gear Spektrum AR89020, TM1000 telemetry. Just add radio or I will set it all up with new DX9 for the...

Anyone flying a 2 axis brushless gimbal? All the talk on here is about 3 axis but there are a lot of one man set ups that may benefit from a 2 axis for the smaller cameras like the Nex5 / Sony Cx730 sizer cameras. Also with the in the UK keeping under the 7KG limit is tough as soon as a 3...

We have just come back from a road trip to Scotland where we took my new BOT. What a trip.. over a 1000 miles 4 ferries and over 60gb of footage from the GoPros. Eyeball filmed the BOT from his little 450 and we have some amazing stuff. Whan I have time Ill post a video but here are a few grabs...

I am looking at adding waypoints but I see the PC Ground station connot be downloaded anymore. Is this discontinued in preference to the iPad version? Am I being gozzy eyed or is there no instruction manual for the iPad Ground Station software? Dave

SO I will spend another few hours trying to sort out the issues I have had since the 2.1 firmware was released back in December after this latest announcement from DJI.:apathy: I have two A2 controllers sat on machines that I dont fly because of the on going issues with Machine 1 The...

So here is the wiring schema for the Carvec G-LOCK and BLD drivers for a 3 axis set up. More to come for other set ups PDF download

So lets discuss the various pros and cons of these two drive systems. I believe both have a place, well for now at least.. Prove me wrong. I have both and my work horse is still servo driven relying on a secondary stabilisation system in the camera to smooth out the servos. (but i dont do...

Any using this http://www.panasonic.com/uk/consumer/cameras-camcorders/lumix-g-lenses/h-ps14042e.html Would love to here from the experts on here their thoughts on this feather weight lens Dave

Well I can just about hear the church bells over the wind and the rain lashing down on my workshop roof.. another day of fettling, forum reading, drooling over kit way out of budget and checking XC weather hoping for a miracle! So what you Brits doing out there? For you lots in sunnier climes...

Aye up. Here is my quick video to show how easy it is to change a single axis Radian in to a fully tuneable 3 axis gimbal controller. No smoke and mirrors just a firmware upgrade developed by Carvec RC systems. What makes me really buzz about this is its British. John Cunningham, the...