Search results

that seems weird.... to bind failsafe, you wanted to put the bind plug into the rx, power it up, take the bind plug out, it should flash still, but different, that lets you set all the channels failsafe. in particular, you want the throttle above 10%, i use 40% and you want the Atti, GPS,man...

it is a blast. i've never tried closing one eye, but if your used to it, seems fpv wouldn't make it any harder. I prefer a monitor

one of the best chineese hobby shops you'll deal with. shipping is immediate, prices are crazy cheap

I've been using this stuff with alot of sucess on everything from naza's to V-bars. Just works and when you need to take it off, it's ultra easy. one $4 roll is enough to mount a naza 20 times. You can get it at ACE, Home Depot, Auto Zone, they pretty much all carry it. There is also another...

sounds like you just got it flat when you moved it. Even an air bubble in your tape that holds it down will give it a drift. completely perfectly flat and it'll cure the drifting. The big thing moving to the middle changed for me is the stability in wind, and i fly in alot of it, usually 10-30mph

yes they do, surprised the pictures DJI shows has it on that tab

5.8, i'm waiting on a dragonlink lrs, building a plank too, gasser, same everything

thats the hs 65mg part http://www.bing.com/search?q=hs+65+mg&qs=n&form=QBRE&pq=hs+65+mg&sc=8-5&sp=-1&sk=

daughnting task, no doubt. when i ordered mine and was fitting to immersion stuff, there was a similar deal where you had to take a chip out. good job, your gonna love em. if you wanna get into tracking, check out Alex's Cannons. just tried one the first time this weekend and that thing was rock...

I've got a spare single channel airwave receiver for sale. Airwave is what fatshark and immersionRC rx/tx use, it is not compatible with the rc305 or rc805 otherwise known as the hobbyking/chineese 5.8 rx/tx's. Retails $49.95, letting go for $30 to your door usps priority. Used once...

depends how heavy this thing gets i suppose,,,,,,, i run 2814 suppo on the dji 30 amp and have a logger on it. this weekend flew 32,000 mah, hit 720 watts on 4s with a peak of 50 amps for four motors /4 is 12.5 amps, and that was full FFF in atti, hit 48 mph....... 1630 gram f450 This weekend i...

you want the throttle up over 10% and you want the blue bar to engage in failsafe, that's it. the rest stay neutral or as they were. i got my throttle at 40%, just put the throttle at 40% when i turned on the radio to bind along with made the failsafe mode show in the assistant. Hit it three...

It is 1630 gram with 4s 3000 35c turnigy...... i'm thinking i need to bump it up to 5000 mah soon. It only flew 7-8 minutes with a few 700 watt high speed passes for like 30 seconds at a time. It's a good time, i'm enjoying it and look forward to getting more comftorable lower. I'm also putting...

I hit failsafe three times, twice going away at 2200 feet and once in a turn back at 2000 feet. it's in my vid 2:30, 11:04, just turned around and held the radio up and it caught it every time, scary though

On your AR8000, is there a satelite hooked to it? Is it dsmx? are both sat and rx lit with a solid orange light? I've had to do the calibration twice in a row to clear the error so if it still shows after the first calibration, try one more time. but first you need the bars to move with stick...

heres the hatcam of me flying the monitor the 38 minute video with music http://rchelicollective.com/zen/albums/kloner/movies/easterfpv_conv.html

yes you want the 4s,,,,,,, they tend to draw mid 30 amp to all 4 motors, i never had any heat with there 2215 motors. does your tx have throttle trim? did you calibrate it with the trim in the middle or off?

heres what it looks like

pics for ideas, this setup is working really well. on all my camera stuff, i trimmed down all the wires and redid the servo connectors. made it really clean up nice both physically and the image coming to me https://rchelicollective.com/zen/kloner/DJIf450quad/28mm/ no interference anywhere