DJI F330 arf

[kloner]

I've got a dji f330 frame, 3 hobbywing 18 amp and 3 rctimer 18 amp esc's along with 4 dji 2215 motors. it all still flies good. the esc mismatch doesn't have any affect on it flying, flew great with naza but it's in a new home so this thing is collecting dust. frame is clean, 2 of the esc's are never flown, i'll make sure to tune it up before going so that it'll be plug and fly. $100 to your door, will include a set of gws 3 blade props for it. also has leds mounted already, got red and infra red. it's a fun los flier, makes a bitchen vacation ap platform. it also has a pair of Spektrum sattelites on it i'll let go with it.

 

[enjoytheride]

Hi Kloner, what size of props do the motors take, and what kind of spektrum sats do you have?

 

[kloner]

it likes 8" props on 3s like 1500-2200mah packs. the 9" gws are about like the 8x5 graup. think theres a apc option too

those are dsm2 sats. i'll throw in a hobbyking 9 ch rx that has dual sat inputs and sbus out.......... it is also dsm2/spektrum

the esc's all only have an hour, all stock. the motors have had a couple hundred flights, think they are all swapped over to boca grade 5 bearings. if there not, it'd be one or two of the bearings out of 8. these are the only dji motors that came serviceable. i've got 2 or 3 2215 for parts and will also include those for ya

 

[kloner]

looks like 2 stators, 1 bell and one of them spacers that goes on the bottom of the shaft and 4 spare spacers for 2212 on 330 arms

 

[enjoytheride]

PM sent.

 

[kloner]

Sold