Search results

the 8j can be switched from mode 1 to 4 inside the computer so theres no different modes to buy. I've had spektrum, jr and now am sold on futaba.

when i got back into the hobby 6 years ago i came in with a full box of snapon tools coming from working in a aircraft paint shop. i always thought they were it till i started turning all these little allen screws with the tools and they just stripped screw after screw after screw. Very soon...

http://www.team-blacksheep.com/products/product:122 http://www.multirotorforums.com/showthread.php?5206-8-quot-amp-9-quot-Graupner-prop-prep&highlight=graupner+prep

when i flew yesterday naturaly i'm still learning "how to" with a new model and new ideas i've never done. you have to stop the recorder before you pull the plug or it corrupts the recording from the lack of the cameras battery. it runs off the flight pack, so i missed the better run down the...

https://docs.google.com/spreadsheet/ccc?key=0Au16aK6Q-0p0dENkdXVGVHJLRm5fRTFQdjBZbUhxZ3c&pli=1#gid=0 the plush are marked red and meaning incompatible. You have to boot the esc's then the naza or vice versa

is plush the red one? there are one or two turnigy esc's that do not boot right, think it's on that spreadsheet from rcg. you familliar with it? it showed what was working and what had been tried and not working

transmitters are on sale for $50 at readymade. I took 3.......

I was less than impressed with this thing today. i think my gains need to go up and i need to recalibrate the gps cause it sucked today. don't know what happened, maybe adding the gimble changed the magnetic whatever. I tried flying it after this in 20-25 winds and it was almost unflyable. i've...

i had to build it twice to do it..... This thing is still super light and clean other than my kapow at the begining there. the 10x4 prop probably didntt help in that scrash, running 9.5x6 in the video where it actualy left the ground

Barely got this one to the 2nd-3rd out of 10 on the gain and it wants to osscilate like mad. not sure if that's the wing in it or what. most of this was when i was just starting to understand how to turn the thing. I gotta figure out a way to level it out on the ground cause they bob around so...

got the first fpv flight under it's belt. I was bummed, got there in the dark and it was blowing 10-15 in the dark, that's never good and never lays down till dark if it is so,,,,,, it was a bumpy ride. On this one the guardian never got past half gain and never got to oscilations. Honestly i...

I solder mine to the board and don't use a plug. more mess/clutter/chance of failure battery packs rarely come with deans, it all depends what you bought, usually packs are wires and no plug. Deans are a great connector, but you gotta do it right. make sure to plug a female and male together so...

thats what normal props are like. You don't need the "short bus" hub but you will need to get em tight. Gotta counter sink your spinners just at the tip so they go on a hair further

the difference between hobby grade and professional grade is all in the details.

I don't know the exact details, but for whatever reason they say that heavy loads and big craft need wk....... it's on the naza webpage second paragraph down. http://www.dji-innovations.com/products/naza-multi-rotor/overview/

I like it. you might turn that data link one side ways and turn it sideways on the dji ground receiver. it'll keep em out of each others hair big time. what does the little sensor on the back there do?

no problem, i'll hang onto it.....

may as well open it up and see if you can follow the power in to a burnt trace or a burnt reverse polarity thingy majig. immersion vtx's have em, no idea if this thing does

well, the 254 was a pile of junk on the naza. i'm gonna order some ends to make the gyro run on this and see how it does. it wiggled just like the jr servo did at center, shook put the hitec back in and i think the gain is pretty close now. because my quad tilts forward alot and rarely get's...