Search results

that's what i did but it took a vivid imagination to what you were looking at, all sheard and shaking across the middle

you want to the fans on the heatsink and the tx design will take care of the rest.

we cross posted With antennas like rubber duck, whip, things like that are called horizontal or vertical plane. idea being if the transmitter has an antenna sticking up, you want the receivers to do the same, and if it's horizontal, make em both horizontal. most important is to match the angles...

alot better. flip that lawmate vtx over so the heat sinks are in the air. thats the "hot" side. More important than weight comes aerodynamics. They get to be like a kite if you get too much hanging down off em. not that it's bad, just not the best for traveling Is that all the dji downlink...

got this finished up, put the fma parallel charging board on it and here she is running 20 amps to the 4x 4s 4000mah packs at 24 volts= 480 watts. Towards the end as i scroll through the menu, the input power is how many amps it is drawing off the power supply and how much voltage is present at...

if thats arms and everything i'd go get that

man, thats flirting with danger. what about sanding the covering off the positive ring behind the crack and soldering the input on there and then fixing the boards crack with solder. Couldn't have been in a worse spot, whats the other side look like? is the ground comprimised too?

brett, my box got full and i think you tried sending a reply about the antennas. let me know

the barometer is suppose to be out of the wind and sun, it is inside naza so if the unit is on the dog ear of the frame getting prop wash, it might not work as good as up inside the frame. dropped so fast didn't have time to recover sounds like a calibration deal where mid stick isn't mid...

that receiver already has a heatsink that works more than enough in teh desert. you use prop wash to cool it, you got four big fans already on it. They do get hot, but that's what they do. The lower the swr on your antennas the cooler it'll run/longer it'll last. What is all the metal with...

Think we should all send em hate mail for that crap Yea, i love my shade with the velcro on the monitors edge, simple and self contained

usually it is a torque tube and usually it is just a shaft going to a coupler going on the motors shaft, couple set screws and flat spots, away you go The funny part is the tail motor is a power hog. most guys run a couple of similar sized motors that i've seen, kv and cell count to match a...

all the vibrations we'd see were from that big main gear under the rotor to the drive of the tail. you got a motor spinning 14-18k rpm spinning main blades 2000 rpm then behind all the spinning the other way is a tail drive trying to get 7k-8k rpm. seperate motor would be huge. seen it in scale alot

nice looking product. Will it run a gopro without a battery? is the part sticking out of the camera hard or flexible?

That guy in the video i posted of him flying the xlc in the park has this thing and this he lives down the street from panavision

on mine it has blue screen on/off. when it's off it goes to static but eventualy even the statics not enough and it goes black instead of like fatsharks or when we were kids watching tv on antennas and how it looked when there wasn't a channel on the channel it was on. straight snow, for...

this is alot of the film from the guy i mentioned earlier with the vario xlc turbine me and helicommand don't get along. They screwed me on the cheapest thing they make, think my emails go in the spam folder now. That's the worst company i dealt with till dragonlink came into my life Good...

Is return to home suppose to be a regular part of flight or something for a worst case scenario?

our ups stores used to be called mailboxes etc. they still do the mailboxes, and you can ship anything there. it's a street address with a box number like an apartment. it's not part of the traditional no shipping to po boxes, that means boxes at actual usps post offices

read the latest manual tuning guide and go give it a shot is there a vent on naza for the barometer? did you clog it?