Search results

  1. kloner

    Help with Building a CineStar 8 (& Copters in General)

    all in german, but looks nice. costs more than mine. What i wouldn't try is them like yours but at hobbyking or hobbypartz. There clones of those and absolutely bite the big one. They make packs die The general rulle of thumb is 200 cycles or 2 years. i write the month/year on my packs and...
  2. kloner

    Help with Building a CineStar 8 (& Copters in General)

    the 5000 mah 3s pack will work if he doesn't plan trying to use a gopro or camera onboard. if it needs that and you had to have a 5000mah, you'd have to goto 4s and that would kioll groundstation later. i use 2200's on most my stuff, but i'm fpv not ap specialized stuff Somewhere around a stock...
  3. kloner

    new naza firmware and assistant software

    no i didn't. should probably go fly this thing before i leave and make sure it's not required to work
  4. kloner

    new naza firmware and assistant software

    was trying to find the input frequency for that servo and it's nowhere to be found. mine is 333hz, this thing has 200hz or 400hz. i'll try 400, got a spare servo to bring along agree, the servo smoothed out a ton on mine. Have a rubber band hanging off it, kinda how i look at it inside to see...
  5. kloner

    Help with Building a CineStar 8 (& Copters in General)

    i love mine. This is as discount as you get, and it still has another 10 amp output to give. towards the end it shows power and shows 24 volts, 13 amps, that's what it's drawing. The first part with 20 amps, that's the output. Down below in the comments i write what alls in it and what it costs...
  6. kloner

    Naza fly away

    so a true flyaway would be a naza that the failsafe isn't set and looses rc control signal. A lockover would be a naza that has too many vibes or bad mounting and would cause it to push itself off center in a direction of the frequency of the vibes choice. That is the only two scenarios i can...
  7. kloner

    new naza firmware and assistant software

    what servos you got?
  8. kloner

    new naza firmware and assistant software

    Wow, the gimble smoothed out alot. can't wait to get back and ditch all these wires and go to ppm. Sweet!!!!!
  9. kloner

    new naza firmware and assistant software

    do we dare? oooo oooo, it has ppm support and gimble servo frequency options. i gotta check it out
  10. kloner

    My solution to naza that slides to one side in atti and gps mode.

    i've been through three nazas on 2 different radios and never seen a radio cause drifting. i've been getting ready for a fpv palooza over the next four days all week, messing with the same software. never seen it. The truth is alot of these have a drift, that was why they released the gps. the...
  11. kloner

    My solution to naza that slides to one side in atti and gps mode.

    radios have something called potis inside that tells things where center is. if stuff wiggles in tx cali, thats a dirty pot, usually when something isn't centering, thats something more than dirty, but is potis related. if gps mode was moving, that means naza saw input to that way. if you didn't...
  12. kloner

    Help with Building a CineStar 8 (& Copters in General)

    if you own 6 3s 3000mah lipos, the big red 1kw charger i posted will charge them at 1c which is exactly what you want for any lipo technology and will do it in about an hour and a half in balance mode. That's one thing it makes it easy to do is balance everytime cause it doesn't take any longer...
  13. kloner

    Help with Building a CineStar 8 (& Copters in General)

    if your serious and going to the end, get the 306b or 308b if you think you need real and true 8s packs later. 306 does 6s but most or alot of 8s comes from pairs of 4s in series, at least the guys i hang with I'd suggest getting the gps module, naza, and a f450 arf this is probably a better...
  14. kloner

    Help with Building a CineStar 8 (& Copters in General)

    my daughter came up and interupted me earlier so i lost my train of thought....... i added links to stuff you want. the radio is the best you can afford the better. futaba is a great unit in either flavor
  15. kloner

    Sony Action Cam w/ WiFi - GoPro killer?

    heres all the stats http://www.bhphotovideo.com/indepth/sony/announcements/new-sony-hdr-as10-hdr-as15-hd-action-camcorders-combine-quality-optics-rugged-des?BI=8989&kw=camcorders-combine-qualityArticle
  16. kloner

    DX8, Naza, gains

    your problem is most likely in the dx8. if you plug your rig into dji assistant and look at tx cali, it'll show you if anything is moving in x1 or x2 which is what the gain would be programeable under. in your radio it should have something in the main setup menu where you name models, choose...
  17. kloner

    Help with Building a CineStar 8 (& Copters in General)

    that link addictive rc is the slowest distributor for dji i've ever come across. The website doesn't even actually charge your card. Other guys like gothelirc.com, readymaderc.com will charge your card and most likely, even purchased ow from gothelirc it is in a box within an hour and shipped...
  18. kloner

    Need a motor with tons of Thrust for my F450

    this is suppo 2814 1000kv with graupner 9x5 and 4s. 2200 grams 1:12 47 mph, 3:37 it showed 47mph on the left, i've seen 55 mph gps speed a bit full forward on naza and not letting go in atti. manual would be even more. this is the same motors, 2295grams, see the amp draw at 2:37 when i was...
  19. kloner

    Your thoughts about the mW output power

    when i was waiting 4 months to get my dragon link, Mike was creating v.2 and shipped mine after announcing it. Guess what one i got, v.1 but, after following the thread that long, there were guys there that had sent there stuff in for repair and some for firmware upgrades that hadn't seen stuff...
Top