Search results

i was just watching it from another thread,,,, you got a movie there.... very nicely done. Is alot of that from work you did over the summer? you were in alot of different places...... the dude on the plank scene was sweet

thanks, i am one lucky dude........ am fancying the idea of a remote flash,,,,,,, does good and cheap even spoken in the same sentence with these or does it take a top of the line setup to get any performance. I want to dress it up with whatever and let my wife wave it around behind me. Does...

i went to the site they listed in the video and it's not there,,, camera mount says Camera mount No hay productos No hay productos en esta categoría she no bueno I run a tilt gimble that'd go right there, $16 plus a servo..... irisaerial makes something for...

hahaha, been there

dale, those radios don't have a mode option in the menu? the 8j does, it can be mode 1-4 by pushing a button, no mechanical change necesary

from some of the documentries i've seen if the climate keeps on the path were going, water is about to get as expensive as gasoline....... groundwater is drying up faster than it's replenished. there already capping wells people have had for decades here with meters and are taxing every gallon...

as far as i know thats the only motors that work on it. Go read the posts on this thing from rtryder aggressive flight or not, that's still a hover unless you got some logs. I push forward on my stick, get this thing 45 degrees in the sky and don't let up for minutes/miles, to me thats fff...

the only problem i see with your plan is Ken tried this and saw the same thing the disco did in forward flight,,,, it has that high speed oscilation thing the disco does with 100kv and 9" props. he run the 650kv on 4s and not sure on the size, but big prop. My disco is 1900g without a gimble rtf...

you want to unplug your esc's one at a time, plug the wire into the receivers throttle channel. with the props removed, follow this and see if they will calibrate for ya. http://www.hobbyking.com/hobbyking/store/uploads/708075066X189350X31.pdf the very last instruction on page 3 called...

I've been measuring this thing out for a bit and i guess i see whats different, it has dihedral if you will, a slight inward angle towards the center, like .5 to 1 degree ish......... dunno why that'd do anything but it is

he haw,,,,, SOLD. Thanks for the deal bro, sweet tracker really did need it, now i can swing my 10 turn 2.4 heli far away down low is about to get even better. I'll try it out flying over the pacific for us in two weeks

damit, pm me your paypal addy

this was what i got... took 800, still pickin through em to get it down to a few. Wasn't all to hard, i can tell i'm old cause i couldn't get my fat but down to the ground very easy, but you gotta do what it takes to get the shot eh? I can tell the pictures aren't this things strong point, but...

it'll work,,, the back is gonna have some dirty prop wash goin on but it'd fly. not sure what it'd perform or handle like. I had 9" on a 330 and they almost touched, 1/4" between em but it flew bitchen. What looks good on paper is a whole different deal in the real world. This frame eats wind...

where are you? in the USA? Goin twice I need this like i need a hole in my head but i've wanted it. please, somebody save kloner from himself

i'd ask trappy about the 4s issue you have, They are kinda hot but it totally works. I've had more problems with my 3s one overheating. there so small and compact it is super easy to short a pin It's just a cad file now, anybody is welcome to have one cut, no royalties. here there like $60-$70...

goin once

yea, this batch was tan, last batch was black.... i can get ya one,,,,,, were using aftermarket power distro like things were not that long ago http://rchelicollective.com/zen/kloner/DJIf450quad/fpv450/ it is pretty much designed to carry a nex camera but the front shelf could be trimmed...

just so i'm clear, that's with the servos? are you in the US? somebody better buy this thing before i do