Search results

I've never used em so can't give you specifics. there suppose to just be hobbywing esc's so they should work fine. the price sure seems right. I beleive there not a fixed end point like i thought they were, just relabled HW's which are known as the good ones. no, disconecting that side just...

it's an mr thing. give it a little forward movement and she'll come down alot smoother than straight down

leave it where you have it for the time being. Try changing the channel on your receiver. it sounds a channel off it will work hanging up, down or to the side, the trick is making the receivers antenna the same plane so it the quads is up or down, put the rx ant up or down. if the quads is on...

does the crane have the bls servos on it?

there is a product thats a mesh material that slides over the servo leads and gives you better odds of not having a servo wire rub through..... I've never seen an esc on any dji look like that..... you mentioned 3 did it, that leads me to think the load was heavy to that side and 3 of the...

at those prices i'd try a set

altitude just posted there ipeaka multirotor esc's in here,,, that's a plug and play option like dji to the best of my knowledge

anybody get one of these yet? Heard there shipping

you want something you can program simonk firmware to. hk has a new cable that makes that easy. i'd get an esc thats compaitible and working with that or get another MR dedicated esc that does the fixed throttle range, 400hz, etc. look at gothelirc.com and altitudehobbies.com for ideas on turn...

esc's with a built in bec need the red wire removed form the servo plug, heat shrink it back so it's shielded but you can get to it if you ever need to use a programer with it...... some of the esc's out there are incompatible, i think plush is one. What are you looking to use?

did you look at dragon plate?

you just don't use the servo wires in/out part, but that's an airplane autopilot like naza for a plane.... return to home, that kinda stuff

were good, oops, that's the eagle tree one,,,,,, mine have just wired in but theres alot of components

yes, the eagle tree osd pro combo..... are you sending that one back? http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=10&products_id=29

Danny, lets do this..... pm sent

it's been a blast,,, can't wait go further, harder, lower and faster thanks

ritewing zII my discovery does an average of 40-50 mph and gets about 6-8 minutes of that depending how fast it winds be being with a single 4000 mah pack....

this is a better version http://www.amazon.com/Eclectic-Prod-170011-Marine-Adhesive/dp/B000LNMVI0/ref=pd_bxgy_hi_img_z but i use this one http://www.amazon.com/Welder-Contact-Adhesive/dp/B003E6ZPWA/ref=sr_1_1?s=hi&ie=UTF8&qid=1348525632&sr=1-1&keywords=welders+glue

now it comes together.....

nice fresh ones, tellin ya, life is good. Throw away anything crashed that breaks a prop Jes, were you educated in portugal? Your very intelligent, your english seems like your from here,,, what up? Even your "expressions"..... does portugal even have something called a penny? Just curious...