Search results

ready to fly with 4000 mah 4s is 1745 and a cased as-10 (gopros out for warranty) No batteries is 1395 and that's 100 gram motors, water buoy, as-10 and a pixim, core, naza gps, ezuhf, 1 watt 2.4 vtx....... will go as far as you can power it

man, $9.99 on the bottom end,,,, that come with a hand job? http://www.powerwerx.com/anderson-powerpoles/powerpole-sets/ 27 packs x $11.99 = not enough vaseline in the world to make that not leave a mark

na, you cut little slots in the motors so theres no possible way to fly off.

good stuff, should set a switch to give me that or the other..... Them guys over on the disco thread are running pitch gains at 230 for manual flight....... insane. had a 330, it was a sketchy little thing even with a naza, never tried fpv with it

when your talking these weights and power, you really want them grub screw prop adapters.....

oh, crap that's right. I can carry 2500g easy yea it's a size you can fly....... those gens ace packs are really hard to beat. they take a lickin and keep on tickin

you guys are too much....

hahaha bad combover, WTF you nitwit, that's a beanie. What are you from austria,,,,,, oh wait. hahaha this place cracks me up

welcome.... where in israel is that? why so much trash on the ground? that normal or just the spot? bet them bees dug that... The farmers field is really small, that a normal sized field? what do they grow there? Whats with your link? whats the look it has, interference?

you bet I just bought a few more,,,

there is a point where too big makes the flights shorter form extra weight. in your case, a stock f450 won't even barely lift a 5000mah pack and fly..... i just set one on a scale, 1lbs, 4 oz...... these are all good for what your trying to do 4s...

i won't even touch a 30c or less pack,, it is available amps, not something it's forcing out... like your house has 150amp service with 15 amp breakers and you can put a 1 watt bulb on and it doesn't blow up same with a car,,, etc. a c rating is a measurement we all relate to known as internal...

on my latest board none of the - are continuity. i haven't touched my old one, works keep us in the loop...... be careful till you get dji with ppm on. Guess she could start up,,, props off would be wise

just like it http://www.securitycamera2000.com/products/690TVL-HD-Ultra-WDR-Pixim-SEAWOLF-Sensor-chip-OSD-Camera-3.6mm-lens.html this is it in action

7" with a pixim cam

you go into immersion tools to configure the ezuhf rx and enable mikrocopter ppm ch1 box...... i use ch8 for rssi now you gonna use one servo wire from ch1 on the ezuhf to x2 on naza. i have rssi signal and ground seperate and going into core. open dji assistant, open tx calli tab and up at...

your only pulling 20 amps total....... i pull 60-70 amps continuous on em all the time,,, never seen a problem this is a sustained 60 amp draw......2-3 weeks ago and that was the second pass down the tracks that pack,,, 4000mah 4s 40c

mine all seperate with one hand,,,,,,,, finger tip and a finget tip with the rest in my palm.... if yours aren't, you soldered em wrong and there actualy at risk of loosing connection and crashing when them bars get missaligned so there hard to put-pull apart

get a shop that sells apc till your ready to step up..... those dji ones are nothing but trouble

there needs to be a few sets of props around