Search results

  1. kloner

    Show your FPV video

    Jack, i'm in San Diego Ca,,,,, it doesn't get much better. Those deserts are getting ready to get filled up with millions and millions of what we call Snowbirds. all them guys up north that get loaded up in there class a motorhomes and head south for the winter. It's thousands of miles of what...
  2. kloner

    HobbyKing Multi-Rotor Control Board V3.0 (Atmega328 PA)

    you never want more than one bec in a system, it'll fight itself till there all dead.... make on with a red wire going in and the rest unclip and fold back with a piece of heat shrink if you ever gotta recalibrate them or program them what ever happened to rcnut?
  3. kloner

    Hoverfly OSD info and Home direction

    can you guys show me what this looks like on a screen? am interested in trying these.....
  4. kloner

    Show your FPV video

    yea, thats what was on it last trip and it ruined alot of good footage. Soon enough i'll be banging these out on the nex5n,,,, on tilt gimble even when i fly that gimble rig, i had to let up just enough to look forward then bang it back to full forward cyclic in atti. At this point i enjoy...
  5. kloner

    8FG & Naza set-up

    welcome to the hobby,,,, show me a picture of the rig how it sits last test. just for something simple to try, put the rubber duck antennas on the video gear and see if it still sucks
  6. kloner

    8FG & Naza set-up

    if it was mine, and i know your broke but the lrs system to me seems like the only choice. wish you'd have gotten the 8j so i could help ya better. I had a ton of trouble with the stock frames, video and rc control... it wasn't till the fpv frames i mounted on my troubles cleared up My...
  7. kloner

    Show your FPV video

  8. kloner

    Show your FPV video

    wait till you see the rest of this stuff. the gopro looks amazing in the new firmware, but i filled up 64g of memory cards so will go through and pick and pull it apart. only flew the quad in Glamis and on the water. it likes wind better than the plane, but when the wind laid down, man what a...
  9. kloner

    Show your FPV video

    Took my Discovery out to Glamis san dunes this weekend. only spent a few hours there, but what a trip. the sand is mezmorizing as it goes by when your flying. had quite the wind going on, probably 15-20ish. when it goes up and does the panoramic you can see the gps tilting it as it pivots. Fun...
  10. kloner

    8FG & Naza set-up

    i use the 8j, it's not a fasst radio......
  11. kloner

    8FG & Naza set-up

    what material is the antennas in? you want something like this... the v doesn't get as good a signal on my lrs stuff, i'd have to imagine this is the same get some goldn rod at your lhs
  12. kloner

    Show your FPV video

    zII getting it done
  13. kloner

    Soldering help... Wire will not tin.

    it's not all wire, just wire that looks like that...
  14. kloner

    FS700 shots

    them prc6 are pretty......
  15. kloner

    FS700 shots

    there goes the neighborhood Hey yuri, did you ever post any of that gunpowder and breaking plates to the tube?
  16. kloner

    Anyone going to HHAEFI this weekend?

    looks like fun..... how far of a drive is that for you guys?
  17. kloner

    Hobbywing Pentium 40A ESC into calibrate/throttle range mode

    look at naza assistant and make sure the sticks move the sliders all the way over. if not, bump up the endoints till it does. sometimes d/r gets in the the way of CSC the lastest firmwares addressed all the turnigy esc problems, i thought
  18. kloner

    Team Blacksheep Discovery build

    it's on deal extreme daniel, you can get them from getfpv.com, but your best off straight through trappy. they have arfs ready to ship..... the thing is designed around ezuhf.... but they all should work. Borris, i bet trappy knows, he'll tell ya
  19. kloner

    Team Blacksheep Discovery build

    build it and somebody will buy it :)
  20. kloner

    Awesome FPV Video.......

    I worked in a good sized airport for 3 years,,, we could park g5's in the hanger it was so big. We shared it with an a&p that specialized in helis, particularly hu1 like timed out for mexico and movie industry. in particular the renegade heli..... he had a few others that fought fires in mexico...
Top