Search results

Broken usb port in your wkm due to missalignment of the usb plug in previous connection . try to hold the plug forcing it a little to see if it connects in any orientation.

Use AF1 (on) and 24 advance. The Hott file is the firm of the telemetry board to be used with graupner hott tx to get direct reading of the telemetry the same way you got with the MK version in case someone uses other boards different as MK.

Looks to me it is more related to the power available from the S800 engines to hold the altitude in heavy configurations. The problem is the S800. It can not support too much weigh with its plastic frame and his engines are not powerful enough to manage them with a safe margin. Instead recon...

That has no sense. How does the IMU know it is mounted on a S800 or a custom frame?. How does it know it's driving a 3kg or a 10 kg multi? It receives signal pulses and sends signal pulses and they are the same in all cases. May be they are right and the IMU are faulty but see no relation...

He messed with the usb wire while conected so it was completely his fault. The bad thing is the pcb tracks where out too so there is no chance to solder them again excep looking for alternative points which are easy identified except for the second from the right.

My mistake. The unknow pin from the usb is the secon from the right, so the opposite to the one shown in the picture.

Thanks mate.

Hi guys. Have a friend with a broken USB in a HF Gimbal board. The solder pads were off too but I am able to find alternative solder point to solder jumper wires for all pin/legs except the second one from the left (view form the plug point of view). I think it is the -DATA pin but not sure. Any...

Tried the 100% and still far away from what a dji wkm performs. We compared a couple centimeters variation on dji vs quite a meter up and down in hfp. Time to remove the hfp once again and wait for another firm update to see if HF can do as fine as DJI guys.

Im running 33 as AH value in the setup pag ast is the value I have set in other flights. The question is if the value matter or not or.

Tried the new firm in a new platfom today. Must say every time y fly a HFP it gives me a pleasure feeling no other gives. Tried the AH and even when int seems to work it allways do a bunglee effect about 3-4 ft up and down. As far as I understand the new firm requires no gain adjust so no...

Imo it is a faulti gps. See it recently and advised the owner to ask his dealer about exchange it. I would not use it.

What about the same effect in an open frame F450 and simply replacing the imu and mixer box solves it.?

Its a hardware issue, you can tame it lowering the main gains of roll and tilt but the problem will stay there and will go worse. The unit I saw doing that finished doing toilet bowl as well and now is waiting for a DJI reply. No idea if it' s related to gps, IMU or mixer box.

Boris ask mr Xavi from uaveurope for cnc requirements http://www.uaveurope.com/

I´m testingf the 1.8 rev 1 firm. Some questions I saw. The first one is I still need to click twice on the connecting button as the first time it shows "unable to detect device". Then, on the general page it shows Hardware version: Gimbal 1.0 (the unit is a V3 but may be that has no...

Mk-thor. In the 6S 13.5 kg video. what portion of this weigh was frame,and batteries and which one was payload?

Very impresive numbers. They are just halve I got with the same engines, load and airscrews but with 6S vs 8S. In watt therms there difference is way high.

In my bench test a 2217/20 with a graupner 11x5 ,wich looks like the one you used throws no less than 4.4A on 4S for 530 gr on a single engine (69W at 15.8V). Your setup requires 2350gr/4 engines = 587gr/engines but far away from increasing the power requirements your sistem lowered them down...

Razzil, do you have the possibility to attach an Eagle tree recorder or simmilar and updolad a discharging graphic of a 25 min flight?