Search results

I don't know why the Gh2 stopped. I am running a hack, but it was not a lock-up. I hope it was a fluke. Everything ran fine the rest of the day. Today is the last at of the shoot and I don't want to make any more changes, but I think we are going to reload stock firmware.

I started it, but camera stopped recording in flight

I posted this to the "show what you filmed" thread. I am flying with the pan axis direct to Rx. It works fine for most shots, but definitely makes me have to think about how I fly instead of just flying on instinct. This is motivating me to try my Picloc again. Sorry if you read lips and are...

That feeling when you see the camera stopped recording too soon Anyone ever have one of THOSE moments when you feel like you just took a huge risk and realize it was for nothing? This was on location today. One of the guys got this clip of me landing the Octo (though the lens of a RED) after...

Pilot flies to keep small smooth movements. Camera op controls all 3 axis. I have d/r turned way down and expo at like 10% as well. Even the high paced shoots like the one I am on right now can handle a slow moving gimbal. We tried flying yesterday where I was flying and responsible for panning...

I did have smooth pan for a while. I was fighting other issues, but not worse than any other gimbal controller, so just dealt. Yes, I was so focused on trying to deal with RSGS I spaces just plugging it into the receiver. if I can;t get the smooth pan back tonight, I will run it direct...

Damn, on a shoot and since having to update the firmware, every time I tilt the camera the pan jitters. I doesn't matter how low I se the gain. This was not happening before. Now I just tried 1.7 and it is still got creating a pan jitter when tilting. I don't touch the pan. Is this what others...

I need the software. Could you post it please. Thx

Can someone confirm that there is no delay in Video Put even when using the AV out (not wifi)

I see DJI s800 and a few other frames use an angled arm to both lift the motor above the center plate and to angle the motor inward. Does anyone know what this design is intended to accomplish? What are the pros and cons? I can't find and discussion on it.

I would love to see a feature that could allow me to flip a switch and descend at a specified rate (i.e feet per second). This could be per-programmed in the set-up utility or maybe via an end point adjustment as if we were changing a gain setting. Three way switch with no descent, slow...

I feel like I need to replace all of the servos on my av200 360. I also have the issue where large sweeping moves hold fairly well, but if there is any wind at all and the ship has quick movements, or even when calm and I start a movement, the video shows it as a tilt issue or horizon shift...

How about using this forum for helping each other. This forum needs to stay on topic a bit better. I don;t have the time to read the endless rants. Sure, make your complaint and end it there. I have had better luck with RSGS than picloc so far. But, I sure would like some advice getting...

Can someone remind me what I do to keep the Pan function from spinning the airframe a bit on start-up. I had to reinstall the firmware tonight and am tuning again. I ran auto tune and have played with the pan center, but no luck. When it arms, even with the switch on the radio set to have the...

690TVL Ultra WDR Pixim SEAWOLF Sensor Chip OSD Camera 2.8mm Wide View camera is on sale for $67 today. Thought I would give it a try. Also added a 3.6mm lens to swap if needed.

I am ordering some more JXF wood props tonight and realized the more you order, the cheaper the shipping (per dollar spent). So, if anyone lives in the US I can order props and you just spit the shipping plus about $7 to get to you. Unless you want to pick them up in Truckee or I can meet in a...

I am looking for a DJI Naza GPS unit. I only need the GPS upgrade (latest version). Anyone have one for sale? I may consider a whole Naza/GPS combo too.

B. Thanks for chiming in and acknowledging the problem. Is anyone else having their computer crash when hooked up to the skyline software? My computer never crashed but has crashed about 3 times only when plugged into the gimbal.

It's a fine radio. I have flown with mine for years without issues. I did turn it into my camera gimbal radio when I purchased an 8fg. I think $400 is a bit overpriced, but should work great if it is in good condition. I am a Futaba guy. I suggest keeping it.

LOL. I think we all have the firmware update jitters. (not just hoverfly!)