Search results

I use the 7" haier and works well. This sun shade works well with it too. It also packs down nicely. http://www.amazon.com/gp/aw/d/B003KV3R1K/ref=mp_s_a_1?qid=1354941985&sr=8-2&pi=SL75 Yeah there are some a few bucks less, but this just has the right form factor

I am very curious to see what you came up with on this. I need something like this that will also include a Gimbal for decent video camera (home built and hoverfly capable :friendly_wink: ) Also, my kid received a ladybird for his birthday from grampa, it is so fun to fly and amazingly...

Yeahaa, what motors are you running? I switched from APC 14x47 to wood 14x5 with good results as well. Tiger 2826 550kv. Still struggling with 4.6.02 by I have a feeling all will be fine when I turn off the mag as well. That does not help GPS though.

How important is it to keep the direction of rotation in a flat plane as we calibrate. Very difficult with a large craft.

This was mostly in Manual mode although I tried AL for a few seconds and PH. Both were wobbly and bouncy. I have had that same yaw issue and that is what I was speaking of when I mentioned the Mag. I agree, next calibration will be with a second person to keep the large Octa in an evan plane.

Not from me unfortunately. I feel like i am relearning to fly with 4.6. I had a shoot today and was embarrassed by how hard I fought to keep the heli smooth with about 10mph winds. I did not have time to test with the Mag turned off, but hope to tomorrow. I may still be struggling with the Mag...

Hold off rewiring anything. There website is showing an older version of the wiring.

I did notice a new set-up utility downloaded when I launched it today. And Yes, My compass is facing the correct direction now. I am struggling a bit with tuning. Even in calm conditions I am not finding the right gain. Today I had a bit of a gusty breeze and really fought it. I am getting...

Panasonic GH2 compatible? I am not sure if the 2.5 mm jack on the GH2 is LANC.

I am actually experiencing the same thing. I can arm after about 6 tries, so inconsistent. Not sure what is causing it yet.

I figured it out. I was shown as logged in and even tried re-logging in, but I had not "confirmed my email" from the email they sent me. So, I guess it was not a true login. Links now working. Thanks for the tip.

yes, I am logged in

BASICS>>>> How to download the hack to the computer... I would like to try some hacks, but can't seem to figure out how to download the actual hacks from personalview.com I see the zip files for each hack, but I can;t figure out how to download them. No right click option, nothing happens when...

update. I went out and tried to calibrate the compass. first attempt after I went through the process (it is hard to rotate an octo with av200!) I hooked up the laptop and checked the compass on the computer. It read about 27-30 degrees off. So I tried again. This time trying harder to keep...

Resistors showed up today. Wires, Wires and more wires! But if it works, I will be happy. I see a potential issue with where i have it mounted. I might need to go further than the 12" servo extension. My main wiring harness is in the back of the center plate frame and up high (so I don't...

I don't use the OSD from the HFP. Unless I can jsut plug it into the set-up utility and check it there. I am building a new FPV rig and once I have a new wiring harness to tap into the fpv I will check it out.

Looks fun. Gets me excited for next week. I take off for the Caribbean for 3 weeks. Kite in hand, no heli though. Although I will be getting plenty of Aerial photos out the door of the plane. Maybe I'll post a few.

I am selling a Photohigher AV320 with retractable landing gear. PM me if interested.

Did you try AH? I cannot get rid of the drop when I turn the switch on. I can get it to hold, but about 10 feet lower than where I switch it. Actually it drops 10-15 feet and works it way back up sometimes.

Clone! That sucks for Tabb. I am sure it won't be the same quality, especially the servos.