Search results

Thanks ! Boris

Your talking about the s800 or the Z15 ? Boris

hmmm i did my order 2 weeks ago for the s800 and last week for the Z15 GH2 version. Got responds back in 24 and another responds that the payment was received. Boris

Robert, the n in Z15n stand for the nex version ? Any info on the GH2 version getting the hdmi converter or not ? Thanks

I am not sure what the plettis need but I guess also around 5 to 6 mm ( red can comment on that ! ). If the manufactures says it will have enough meat for a drilling like that go for it but I doubt it. Given the 14 15 mm you have now you end up with max 4 to 4.5 mm on each side after a 6mm hole...

There are some rumors out there, but i cant say how much they are worth. I hope though that there is nothing to it. Boris

Hallo Mathias, Es gibt auch eine deutsche section in diesen Forum falls du Interesse hast. Viel Spass Boris.

Okay der rote Punkt ist der Balance punkt schwer punkt Mitte ( keine Ahnung wie man das richtig ausdrückt auf Deutch) deine Kopter. Dieser muss aber nicht in der Mitte deines Kopter sein, jeh nachdem wie ausbalanciert du deinen Kopter aufbaust. Diesen Punkt musst du nach dem Aufbau finden zuerst...

Hi Marcell bis jetzt sieht dein Aufbau sehr sauber aus ! Wichtig ist das die IMU solide mit dem Rest des Rahmen verbunden ist. Nicht wie wir es vom MK kennen mit Vibration-Dämpfer etc. Um so fixer zum frame um so besser. Bewegst du die IMU muss der frame mit wollen so auf die Art. Die Sensoren...

I just started testing the 13 6.5 from aerobot 14 grams for now on my CX and they are working fine. Next i will test them on my CS 8. The quality of the props is not perfect though not comparable to the 12 3.8 11 gram from the MK store which i think are produced by the mejik guys anyways...

They also look like the http://www.smartdrones.de/collections/propellers/products/sd-p400c-smartprops-400-ccw. Nah i wouldn't fiddle with them and return them. Good 14 15 " carbon props that are also light weight are rare or i havent seen any yet. Probably the Xoar woden ones will be your best...

hmm i dont know I think it would be fine, considering that the plettis all the models through the bench are fixe with 2 m3 screws http://www.multirotorforums.com/showthread.php?862-And-my-knees-go-weak-again-the-new-Droidworx-airframe&p=11053&viewfull=1#post11053 Maybe an issue with more rpm...

For a Quad interesting, would be nice if they push out some infos on the settings whats possible ! Boris

Guys just tested the 13 6.5 CF 14 grams on the CX http://www.aerobot.com.au/shop/all-products/51-aerobot-13x65-carbon-fiber-propeller-set-v2.html. Was only flying indoor but in a tight room so i can see already how the bird is dealing with the turbulences and the ground effect when i let it...

But Iris we can start the whole fan boy stuff :) Could be fun. Ill take the complete system side DJI and you do the zune tatoo thing so MK PH etc side :) Edit ( by the way this was a joke to make us both laugh. I am pretty sure you understood :) )

Ah you know how it is boys and their toys and raging on them is a sin :) Boris

Yeah i don't know, either none of them are really testing them or avoiding a clear statement. If you want to be on the safe side two board is probably better. On the other hand take a look at the thin small soldering pads you have on all the distribution frames for MK Bl Ctrls which makes me...

hope that helps: could you please send me a current rating or estimate for your power distribution board. I am using it happily on one of my hexa now i want to setup an octo with it but not sure if in an emergency full throttle situation with a loaded 6kg octo a possible over 100A draw could...

nope i dont and i cant comment on them. I just think it is interesting what the smartdrone guys are going with the approach of very low KV what that actually means concerning stability we will see. They also have a new 4 in 1 ESC http://www.smartdrones.de/products/sd-e20a-esc. Just wanted to...

If you have time post a picture of the 15 CFs I would be interested to see them ! Thanks Boris