Search results

the 5s 11000 mAh just have the best mAh to weight ratio with 1020g, compared to a 8000 5s nano tech for example with 924g.

CineRebel, i feel honored, but time wise I use the spare time i have or lets say it like that the in-between time during usual work ( Real-estate developer ) to comment here on the forum to test and fly and film hobby wise a little. It would never work out for me to take on some jobs otherwise i...

CineRebel, I think the best man to ask for a prop advice for the plettis is Piano Dirk. But at the same time i dont think he is so much into WKM and he might not consider the differences. I lately got the 13 x 6 or 6.5 CF props 14 grams from aerobot and i didnt expect too much since the higher...

not knowing how HF deals with its Autoleveling, but i guess you have the CS8 with the QC, must fly them with 14 4.7 APC so you should be on the safe side with 14 x 4 Xoar. But Lars is right play around with ecalc and at least avoid those that bring you setup into the red numbers. Boris

belated habby birthday :) hope you had a good one ! Boris

Tom really nice looks like on rails ! Boris

Hi Guys, didnt have a Naza up to now only had my WKM setups. Just trying it out and trying to see what i like more CC or Naza. Naza is working like a charm the only thing that is strange and this only happens randomly is that my bird descends on yaws. Its so random i cant pin point it. Gains...

my guess is that the cable for the external poti, in case of the pan servos for the resistor had an issue. The technician probably took the servos apart refreshed the solder joints and things worked the way they should. It seemed like no matter what you hooked up to the external poti cable it...

Hi Jonathan, Andreas (Mr. Baier ) will probably not be reading this thread, but send him a mail and I think best is if you return the board for him to check out what went wrong ! To me it sounds more like one of the FETS didnt do what it was suppose to and did close or what ever. Just...

Sieht gut aus !!!. Kannst dann testen ob du das GPS Modul direkt au die Platte montieren kannst ohne den Stengel. Denke das du mit den 2217 axi mit 11 x 5 graupner glücklicher sein wirst. WKM mag auch mehr RPM, aber jetzt mal egal . LG Boris

Great to hear that its working out ! Boris

Hi Marcell, zu der T8FG hast du dir auch einen S-bus Receiver bestellt ? Zum Kalibrieren gibts beim WKM nicht viel das ist das angenehme. 1. Fernsteuerung muss kalibriert werden im DJI/WKM tool. 2. Flugmodus-steurung/kanal muss eingestellt werden. 3. Distanz angaben müssen stimmen COG to...

Silverwood the best would be a transmitter were you can change the actual module to be compatible to Futaba Fasst, thus S-bus to WKM or to Jeti for MK. Jeti for the MK still have the advantage of telemetry on the Jeti box etc. S-bus allows you to use that one cable to hook up to the WKM from...

Nothing really to elaborate on. Some product appeared on RCgroups that looks similar to WKM and at the same time there are some rumors around that some of the development team from DJI split off. All rumors if true or not etc. The product thread was closed again because they mentioned the...

Are you sure after flashing with the PPM FW that everything went well. Did you check the status log window ? Boris

Looks fine ! For you future setup try to keep the ribon cable as short as possible. Knowing from you PM that the Herk board shows no response from the signals they are getting from the hoverfly board, please take the Hoverfly boards out of the equation at the beginning and hook up a servo tester...

iscorama i am completly confused were it the front and the back. Am i right that you have the nose pointing to you at the take off try in the video before ? Boris

Noch klein aber fein :) http://www.multirotorforums.com/forumdisplay.php?52-German-Language-General-Discussions Boris

Hi Bart, As far a i remember he mentions in his first video or he actually tried the pan servo on all channels explicitly mentioning that he has default travel and trims. It looks to me though that in the first video he dosent have the resistor pluged to the pan servo. But i am not sure ! But...

Bart, maybe I am wrong or confused, but in this video he has the resistor and is seems to work with the servo on the tilt. The additional movement i guess is caused by his radio or what ever. If he uses the same resistor that comes along with the CS gimbal for his pan servo the resistor shows...