Search results

same here can't get 9 min of a 6000mah 4s pack with my CS8, only with a 8000mah 6s i reached that range !

but like said. The beeping is not coming from the motors being hooked up wrong to the ESCs. Its the ESCs not being hooked up correctly to the WKM, or you haven't configured the WKM to a HEXA yet, thus only 4 out of the 6 ESCs are getting a signal. Are all motors beeping or only two ? Boris

were are you flying exactly. On an open field or in between houses or you backyard ? Normally it should take 1 to 2 mins in a free open field. Don't think there are anymore SH specific problems, and the NAZA gps modules were produced were they already new whats going on etc. Boris

Hi sotomatic, the WKM itself beeping never heard of it. If than its the motors thus the ESCs signalizing that something it not right. Did you connect all the ESCs and did you choose the right layout config for you quad hex octo whatever you have ? Boris

nope gab mal das Gerücht das DJI daran ist. Jetzt wurde es aber nicht mehr bestätigt etc. Kann mir aber nicht vorstellen das sie nichts rausbringen werden.

strange one again grey frames, but it only happens on the first file after i formatted the card. If thats it i can deal with it.

sanity is not variable or ? if it works in low light it will work during day time ? with the other high nitrate patches i always had the problem that the worked while testing inside low light but outside the writing would have failed.

Exact same setup as you 95 card manual mode etc. Sorry and dropped was not the right expression i get grey frame flashes. Maybe it just VLC just tried another time in low light and it worked. Thanks

yeehaanow tried out the combo patch sedna Sanity, with 24 1080 is am getting dropped frames after 4 5 seconds. Have you experienced that ? Thanks Boris

Minimal horizon issue on the zenmuse after extensive panning around etc. But they are aware and addressing it.

thanks !!!

This is a compilation of shots from a new mount we have co-developed with DJI-Innovations. The Cineron is the world's first fully-stabilized camera gimbal for Remote Control Helicopters. can someone explain this to me. So DJI has the mounts for bigger cams based on similar technology ? The Hero...

Kloner were do you get the info on the dimensions for the 3 and 9 turn helical and the cloverleaf. Any webpage blog were all the info is given ? Thanks Boris

Im to chicken at the moment to test my s800 new assembled with new ESCs and the new FW on :) Ill just got FPVing a little were it doesnt hurt as much if something happens :)

Strange one it resolved itself today by just working all of a sudden. I think the reason at the beginning although it don't see a connection was that I started up the WKM unit in failsafe a couple times and configured it. It was in failsafe because i didn't connect the RX. I didn't later though...

Isn't there a marked spot on the TBS for the CoG ? And this indication of the CoG on a frame again might not work out depending on were you are placing your components. In general though these frames fly better if the CoG is really in the middle of the frame or the indicated CoG depending on the...

damm want that !

meme watch out when you build the QAV500, those vibration isolator little orange made by tim himself isolators have threads on top and bottom of them. If you tighten the screws that hold them to hard you can ripp out the threads. Was was close to learning the hard way. Although tim warned me...

Im the one in the back, behind the guy pulling the funny face. Japp its a 2.4 setup. Didn't have any problems with the GPS hold was rock solid. But there wasn't very much wind that day.

uninstalled reinstalled several times tried it on a XP windows version on windows 7 won't work. Assistants 1.30 and 1.30a always show the same issue and don't allow me to edit the gain setting. The previous assistant version what ever it was works ;(