Search results

No can't feal anything on the motors turned by hand they all feal the same. Props are okay no chips and nothing picked up on them. Just looked at the video i did 10 min before the last flight and the vibration and sound were much less. Just to go sure Ill put on a fresh set up graupners balanced...

Third axis were the bearing has issue ! This bird was vibration free 2 weeks ago and now **** again ! Please listen to the sound what you guys say ? Thanks Boris

hmm really don't know were and how to attach a landing gear. Don't want to put any stress on the bottom plate having the FC on there the distribution running in it etc. The only thing I can think off it doing it Cinestar style: Attaching them out going onto arms to the DJI arms between the...

Thanks ! Having CW on top and CCW on the bottom you are also running different pitched props top bottom ? Or all the same. Thinking if you are running different pitch on them you adjusted that the yaw stays equal in the motors mixer ? @Kloner Thanks ordered ! Boris

Just check the s800 rcgroups thread last 3 pages. Boris

+1 I just always try to motivate to finally get a complete transparent makrolon bird :) I think it time to really just make one myself !

It a really bummer just wanted to cruise out to salzburg take the s800 along and after reading the latest mishaps in RCgroups i think i will leave it on the ground again. Although i trust DJI to take care if something happens, the hassle it just to big ! Getting a little frustrated about this...

My thoughts were just this is already a great fast to deployed FPV setup for example. Now Carbon is always a little bit of a downer when it comes to FPV setups and the whole VTX placing etc. Ill check out your page looks tempting to have one in the collection :) Thanks Boris

Very nice and interesting Design ! Any plans ever to use a different material than carbon ? Makrolon or Lexan ? for example. Thanks Boris

Kari, check the rcgroups autoquad thread. If i am not mistaken reading it late night yesterday there was one guy who announced some time ago to put it on a CS8 or a CS8 clone. Boris

hmm could work some acrylic tries. Torsion should be stiffened since the slightly glued on acrylic supports at the moment loose contact when i twist the arm. Once bolted together it should work ! Motors plates will keep this thickness since want to work in LEDS.

I will put on morphsuite to make it more interesting for them :) and I know around what time they are relaxing with their herbs :) http://www.morphsuitsdeutschland.com/black-white-check-morphsuit Boris

uh lucky found a X8 motor mixing table for the AD6 even from a guy in vienna. Probably the Disco will need some tweaking due to its layout, put a good starting point. Boris

Also worried about that but have it in the back of my head. If necessary carbon sleeve around it of denny carbon nano tubes approach to stiffen them out. (Edit) or ill just get some made like the QAV500 arms probably less stress or even try to fit those. A little longer arms would be cool...

The thing I am puzzled about is which X8 configuration to use. AD6 being brand new to it and just skipping eh reading over the wiki allows me to configure and setup with the mixer. Question is what are the pros and cons of these X8 config ? Can only imagine that the first X8 setup will result...

japp excited about this ! especially to try out a new FC that seems promising !

AD6 and need additional components: AD6 of coarse: gonna power the AD6 over a CC Bec, just trust there the most. Not sure if i am getting the Rev 2 of the AD6 or not. The Rev one take up to 18v, so just in case nothing change in Rev2 the CC bec is ready ! ESC 32: Would really like to...

Hi Guys, Now is the time to give AQ6 a try and I am excited ! For the heck of it and already having a X4 TBS discovery I am interested to setup another one but overpowered ( X8 conf) for the fun of it for fast ascends and forward flights. If i understood it correctly the AQ6 has no manual mode...

+1 Boris

check http://shop.carboncore.co.uk/ pretty sure you can get the HFP stuff on there, but ask. Certainly cheaper than DW and the quality is good ! Boris