Search results

We have to base this on what DWB already has and i guess he is down the road with f550 set. So there are boundaries to what you can lift with the F550 even after replacing motors and other mods. I woulnt be concerned about any gimbals cams at the moment ! Get it in the air and than consider...

okay cool will try that thanks !

Japp in the cellar there are a lot of pipes and stuff ! And its a typical old house like in vienna with a moist cellar. The cellar is the only place though were the heavier cars or trucks can't be felt. But you really think its the metal or whatever around ? since the mag logs seem to be clean ...

Hi Red I will ! First round of the static calibration hmm docent looks to good and i moved the board at the end ;( not good. Think there is also a glitch in the Rate part :( mag rate temps

Into the fridge and than in the cellar for logging :) Couldn't get die listed class 10 micro SDs so i got a hama which also works. Probably one of the bigger brands anyways in th background ! Was always told that bubble wrap should be one of the best vibration isolator lets see ! :)...

nah i see no reason lets wait for the price the additional features and the weight of it. If it allows for lighter smaller copter setups in combo with a Gopro3 which shouldn't be a problem, it could be a very interesting tool ! Heard in the background that the pic of it in the beginning of the...

For all the items you mean the items you listed above excl. the DJI stuff you already bought ? Boris

japp and all the ESCs also seemed to have survived the soldering. Heatsinks on and than enough for tonite. Otherwise I start calibrating the board and find my self still awake on friday doing the Kalipso :) Wonder why i didn't get a plug for the receiver port hmmm ?

uh up and running happy !

I wil tell you once the CNC guy gets back to me. I am planning on making them a little longer that 11" work. Shame since its a couple cm and they would Boris

I actually already have them on my TBS Naza. I like the amount of the configuration possibilities, like the current limitation, IC2 Can-bus PWM protocol. Ill give you more on it later just in the middle on loosing my mind on these 5v solder jumpers on the ESC32 :) Ah and I think simony wrote...

Okay but in a productive setup on the copter they can both go down at the same time ? Lipo to ESCs, Lipo to BEC to AQ, I can take off the lipo or the AQ always has to stay on the lipo for longer ?

Thanks right at it. Whats with the board can i configure it when its powered up over a FDTI interface or does it need external power ? Don't quite get it and a jumper hast to be set ? Thanks Boris

Red did you use the ESC32 in combo with the AQ ? If so the logic side of the ESC32 have to be powered with 5v thus the jumper has to be soldered and the 5v jumper on the Motors outputs on the AQ has to be soldered ? Thanks Boris

ESCs done ! I actually only want to cool/put on heatsinks on the FETs. The ESCs are directly under the props wash and max I will draw 17A maybe with 5s.

lets get to work. Hoping i find the time :)

true probably doable ! One will have to ad additional weight to not only balance the Gopro itself but to balance out the weight of the motor on the Zenmuse, thinking that the gopro will not be heavy enough itself. The advantage of a Gopro mount could be weight and the cost of it lets see. To...

now the thing is the zen gopro mount were pics were already around in the forums ( by the way the final one will be different ) will probably still be released in december ! Lets see if they make it by time to have it work with the Gopro3. That could be a very nice combo. Boris

Meme directly over gopro us store. International shipment wasn't a problem. But they are not shipped before 14 nov :(

japp also preordered it, really exited about it ! Boris