Search results

Hi Doug, looking good. how do you manage the pressure adjusting inside the housing to get the baro sensor to work ? Thanks Boris

Hi Olof, sorry if I am stating the obvious but you have to command the bird with the roll stick to proceed on the circle around the object. you are doing that ? or In POI (POI, Point Of Interest) flying, the roll channel controls the multi rotor circular flight speedaround a fixed point, the...

Hard to say what the real size of this thing is. 40 mins with a red don't think thats going to happen with the current lipo technology. Than quad for expensive cam equipment is not a good idea, no reduncany at all. One motor or ESC dead and you will go down for sure !! Microdrones in general...

Hi dan the concept is not new. Couple of them around. You can fly in the rain but there is still risk of failure and you have to take care of the motors afterwards, ball bearing will also not be happy etc. They are fun but i don't really see the point of them. Some land them in the water but...

hoveringal. please be careful when using trims to operate flight modes. You don't have a direct feedback as in using a switch in which position your are in to tell you if IOC is off or corse lock or home lock is on. Could result that you get lost ! Personally i think the most important thing for...

HI Ryan, sorry didn't see your question. For he ezuhf antennas i don't use any guide since they stand by themselves. For different receivers Futabe etc. I stiffen the bottom part of the antennas with the little plastic tubes of there ear cleaner stick an than glue the pastil together in a 90...

Teramax's video friend here from vienna ! Boris

Denny. I have a setup here ! Normal quad. Leveling and GPS hold is better than MK and WKM. I have it on my list to be mounted onto a heavy lift sooner or later ! Setting up takes a lot of time though, especially the calibration of the FC. Static/temp calibration is necessary and a dynamic...

by the way just like there is flexible PLA its there ABS for printing ?

cool thanks I think i know what i need ! Boris

Okay I will get the parts for the heated bed and print the extra fan. What method of the heated bed did you use ? Glass or ALU ? Any how to that you followed ? Thanks Boris

okay I got a ultimaker :) whoever else has one, I think red for sure, did you guys go with a heated bed and two fans mods right awe or just kept it standard ? Any sources for PLA and ABS the ultimaker shop it out of stock on most ! Thanks Boris

same problem: http://www.rcgroups.com/forums/showpost.php?p=24019634&postcount=16844 Boris

modles write an email to DJI support no reason for waiting since it will probably take time until they respond anyways ! Link your video and that of the other guy. I will try to find the third one that had the same issues ! Boris

could be, but if his IOC works and his GPS hold it would be a strange on the the RTH and Failsafe doesn't because the Compass wasn't calibrated correctly ! Boris

japp Herkules II for MK ESC32 for MK, but not capable for the A needed. Ultra ESCS also have I2c 20A version 35 A version 4 - 6s but 50a in general is a lot ?

its the third video like this that i have seen. Chech the video and vimeo and leave him a comment. There is a second guy that seems to have had the same issue. Also try with him. If you don't have a viemo account ask him in this thread: http://www.rcgroups.com/forums/showthread.php?t=1762213 Boris

oh man i should have never seen that. I know i am going to try it tonite after a couple drinks :)

nah dji only good experiences in the wind ! One might not like the way its levels but in times of gimbals that can actually correct the copter movement instead of just hunting after staying level, it doesnt really matter anymore. check out droider being blown away :)