Search results

+1 I have a additional suggestion to that. There a lot of help seeking that, that start the thread with the info, My copter just flipped, what should I do. Maybe it would be a good idea to set standard or a reader if your seeking help, " please state FC, frame ESCs etc. And add pic of your...

It's not my frame or gimbal :) just to get misunderstanding out of the way. I'm cost commenting some jada jada. Right though the frame is from flyfuino. Have one here. Good choice for the money !!!

hmm really ? haven't tested them yet on the copter just with a servo tester. So RX and V3 powered up at the same time ( I guess V3 powered over a bec and only signal in the RX) and they retrace up ? Thanks Boris

nothing big i have three builds standing here and i am flying the auto quad in default setting ( PIDS) just don't have the time. It could be that my alt hold which gets controlled by the throttle stick similar to DJI is just not set up correctly. Since you can define the mid position of the...

hmm what range do you want ? Big birds (skyjib) i personally don't take further away than max 200 meter anyways. The investment it just to big too much risk etc. Otherwise many times when it come to the video transmission the antenna play the biggest role ! 200mw 600mw 800mw all not so...

I would leave my hands from it until you haven't heard a report from a actual customer ! Most of the stabis have been a fail up to now. I strongly doudth that they got it right, but rather are offering just something to have a piece of the cake ! Boris

Yes the OSD ties in the GPS data from WKM. If you are doing this setup for a Skyjib i would go for the DJI OSD Mark II. Not only that it ties in the GPS data, once the new FW is out the IOSD will also have full logging features over the WKM syetm which is nice to have for debugging analysis so...

not sure which video you are looking at. But smoothly is only possible in a two man op with the zenmuse or whatever gimbal controlled over the sticks with probably some expo/dual rate on it. One man op will always be a compromise or either not being able to control the gimbal to its fullest or...

Hi Shawn, i have one standing here: performace wise auto leveling gps hold, out performing DJI MK ! Altitude hold i am still having minor problems. Setup time calibration etc. Is a lot to do and more complicated than MK for sure. Static dynamic calibration doing it the first time and than...

hmmm on jussis approach, he mentioned it was running standalone. If the meant with out any RX input or without the Autoquad FC input i can't really figure : but here it seems to act better during a pan. Yes and jussi was clear about it in the Rcrgroups thread: Quoted from Rcgroups thread "...

yes defiantly a possibility ! as far as i understand it the Alexmos brushless control or how ever far it goes i am not sure, is being licensed to a lot of companies/e-shops at the moment coming out with gimbals and approaches, and one should just be cautious. There will be difference in these...

hi nickel you have to stay with futuba ? with jeti ppm instead of sbus its possible ! Boris Switch on a second jeti radio and control the zenmuse or all from one radio. Two receiver on the copter not connected to each other. You can freely assign which channel should do what on each RX.

heheh funny one not sure in which way i mean it :) hmm but on the yaw things are not looking that great Think the auto quad guys will be the safest bet !

Johna to really help you. Post some pics of your setup, we need to see where the components are placed. Give us screenshots of your assistant ! Otherwise it just guessing. For a F550 your gains are also to high. Start with 130..140 on roll pitch yaw, vertical just keep on 100, attitude both...

Hi Duane never seen it anywhere in the shop. I guess you have to ask one of the dealers to order it for you from DJI. Or try DJi direct they might help you. Boris