Search results

you can get the plates fairly smooth I stopped the print because i could deal anymore time wise and knowing i will not use them i just need them for a prestinstallation and looking if things fit. For plates in general the PLA extrusion dosent make any sense. The strength is more in shapes that...

printing done, vibration mounts boom clmaps and top bottom plate. I must say though printing the plates is a drag 4 to 5 hours, Think i am better off bringing it to the laser cutter guy 5 min away from my house and get it cut out of wood: all printed in quick and dirty, certainly better quality...

Hi Mat, the guy in the video prints without a heat bed, so if yours definitely needs the heated bed i would guess its different stuff. Going to order some and i will report back ! Boris

@ kloner its definitely the way to go. @ Red japp I know. I will start with the mods soon. Already have a list of mods heated bed belt tighten thingi, extra fan etc. This stuff is really cool ! http://www.youtube.com/watch?v=bB5L_JHyoNg check it out at 3:10 and check one more arround 4:40...

centerplate printing :)

i must say i am amazed that some parts are really robust and can be used in a functional way for sure. the ability choose the density of the components also makes them light enough ! Think that just the first printer of several to follow :)

the built in one from ultimaker cura software / not sure which one it is ! tried netfabb but there were issues printing. At the moment i just want to print in the next couple days i will start modding the printer and reading into the differnt FWs and slicer in depth

Hi Guys, got a 3d printer Friday and super happy that i made the decision to get one. I am in the process of desiging a smal X8 bird for gopro nex 7 etc. Key features: Wire rope vibration mounts: Plug and play Arms: Gimbal quick release etc. Components i will be deciding on the way. More...

so slowly finishing up the build parts finally went out to the water jet cutter machine, Decided to use that instead of a cnc. at the moment setup for the zemuse gh3 modded. Lets see if the vibration mounts work otherwise I have other ones in the works. Once the 3d printer is here they...

Dave a pleasure ! Any questions just post them here ! Sometimes it will saves you a lot of time, before doing specific research ! Boris

Hi Dave, since you have experience with rc planes I dont think that you will have any problems with getting a multirotor in the air ! You have serveral choices: For example FCs: Mikrokopter Hoverfly DJI - WKM or Naza Autoquad APM etc. they all differ in features and some are more...

remember this was stated a couple times about the maxamps their true C rating is not constant draw but burst ! Digitech ordered several of them and returned them since their 40C true rating 10000 may 4s 5s 6 whatever couldnt deal with a constant drawage over 40A and the V dropped making them...

its is an akward one. But one could also look at it from the other side. If it is a power issue why would it work in manual mode. There is no draw difference or minimal between manual mode and attitude mode were extra power is needed for leveling. If it acts normal in manaul mode logically for...

In general i would advice to get rid of the all the double sided stick tape and use dual loc http://www.3m.com/product/information/Dual-Lock-Reclosable-Fastener.html. Just much cleaner and part come of and can be stuck on again. Only the IMU should always be mounted with double sided. I even...

Was it windy when you were flying ? Boris

Forget my approach about the VTX. I wasn't aware that you have a VTX DJI setup. I suspected you having a VTX of a different brand needing arround 1000MW which results in drawage that can be problematic if connected directly to the WKM setup of the GCU video out port of the Zenmuse. Bug free...

What kind of videos transmitter are you using ? how much A is it drawing ? How and were did you connect the videos transmitter ? Dont worry about the c rating of the lipos. 25c even 10c should be enough for the S800 fully loaded running on 6s. There seems to be problems at the moment of a...

Bart, will you be selling your boom clamps ? and any chance of a 25mm version ? thanks Boris

concerning the topic dead. I don't know if you guys caught on to this but its official in the german MK forum, they are developing and already pushed out beta software for a Android based Groundstation app for waypoint flying. Addtionally to that they seem to be pushing out a bluetooth expander...

I was wondering about that. Since the WKM nicely adjusts the throttle hover point in attitude/GPS mode no matter if weight was added or removed. So there has to be somme calculations going on to adjust that, which than again would seem like they would also adjust the whole throttle range if...