Search results

they are running them up to 8s with herkules so dont worry, special herkules version though !!! Boris

if you really want to balance it out yon wont be happy with the standard craddle on the Av 200 Av 130. The holes won't give you a chance to work percise enough ! Additionally there is no adjustment on the roll axis ! So no chance of bring the roll axis back into the sweet spot for different cams !

enjoying ! little waggy on the tail though

guys something going on with the forum ? so slow since 1 1/2 days css dosent load during most page loads and so on . Boris

I have it install on a normal WKM V1 with the latest firmware and assistant. It will not work with the naza. Naza doesnt have a physical can-bus socket were it would fit. If they are planning something for the naza I cant say !Boris

I got it as a test unit a couple week ago already, But i never got it to work ! But it wasnt DJI fault is was me not reading the instructions that you IOS device has to be updated to 6.01 version and i was on 5 something. Think copterworx should have them on the 30 th ! Boris

By the way if you use the LED module. Take are that your IOS device as a 6.01 or above IOS version running. I was messing arround for a couple weeks having inconsistency when try to connect because I still had my Iphone on a 5.XX IOS version ! Boris

What would be cool would be some more telemetry and maybe a HUD, but lets see what comes ! Gonna make a flight video this weekend when I maiden the x8 and use it to tune the gains ! Boris (edit) yeah as far as i know they are coming out with a Android version !

Going on Advanced settings splitts into the following: Motor, start up speed: Failsafe and the different options IOC choosing On of Off and which controls used Gimbal on off an the gains and travel points Usual Voltage setting And limits Last TAB is More gives you an option...

Hi guys got the chance to check out the new led from DJI with it bluetooth extension. Actually like the new approach DJI is taking with the new GUI for their PC assistant. Better layout and more to the point. Before thing looked a little hacked together. Same goes for the IOS App. Nice clear...

Its a really bad joke actually. April fooling your product in a positive way. They should be aware that people take it for real and should at least comment on the video yes guys its a render and yes guys it was a april fools joke etc. Strange approach ! Considering that people see this and press...

No clue never seen it before. But to tell the truth for calm conditions flying thats not very inpressive and the gimbal was is just radio controlled or actually stabilized ? And wire dampening on pull strange one !

New WKM as seen on NAB was called A2M if its really the end produkt name we will see. There is a general upgrade of the IMU going on, thus a IMU v2 if that will be in a alumium case we will see. It should have better vibration dampening for all the users experiencing drops due to z axis ACC not...

I would go with viacopter or flyduino. They are in europe, but viacopter already has a good name being part of the AQ team and behind getting the AQ FC boards done, quality with other word. Additionally their board already have a USB port and no need of an extra FTDI board. They also announced...

Jfro for a hand switch just use a servo tester and mount it to your rig ! Not all board will have and extension for the third axis ! I have seen some with three drivers on one board, which makes it a huge board and a form factor hard to mount on a copter. Take care when you buy 2 axis board...

eventually one board and one IMU. For the board already out which only have two axis there will be a upgrade or lets say it like this the flyduino viacopter version of the alexmos will have and upgrade possibility. Don't know how the others will deal with it ! Boris

which job the one of taking the aerial footage or designing and making copter/gimbals ? Boris

For the Gopro it really doesn't matter that much, motors are most of the time stronger than they need to be and a little of balance wont hurt. For a gimbal for Nex to small DSLRs its already crucial to have the up and down adjustment on the roll axis ! To tell the truth i havent seen any except...

And an unbalanced gimbal will be the reason most of the time, why you get vibrations on the gimbal in certain positions !

Guys just want to point it out one more time than i will stop boring you ! Most of the BL gimbals popping up have one little draw back to them ! They might work well with the cam they are design for but than it gets risky to get them working with others. Why because the are lacking the ability...