Search results

Just got a IMU V2 actually seems to be the IMU of the A2M system. It says on the back DJI Model NO. A2M Boris

Hi Directoryboy, what FC do you have in the bumblebee _C if it says PMU is guess its based on WKM wookong ? Boris

and i would secure the micromatch plugs on the herkules ! The seem tight but if the ribbon cable are under a little bit of strain vibrations can lead to the micromatch plugs to get loose. Hot glueing them to the board is an option. Just go sure that the hot glue you are using has zero...

cool happy it works !

hmm pretty sure that he whole solution in the zenmuse ist Maxon based ! Motor to Encoder to motor driver ! The way I would consider maxon to work is being clever enough to keep enough buffer for a stalled motor ! The sliprings could be an issue though. They seem very small on the zenmuse on the...

steve if you are concerned about shorts, which is good to be !!!! Also cover the solder pads of the elkos ! Probably more crucial than the Motors phases themselves since hercules can handle shorts on those ! https://vimeo.com/55370602

also check all the pins on the micromatch plug if some of them are bent

When you test both board are you using the same ribbon cable micromatch setup ? The issue coudl also be there !

Does the oragen LED go on on all the units ?

Ah you ment the bridge for the ground. I didnt solder it and it works and the previous herks i connected only with the servo signal cable ! Have you checked while flashing that your choose all the different ESC units from the drop down selection ? Are you sure they are all flashed for sure ...

h8two8. please dont start up a zenmuse without a cam on it ! Its pain for the gimbal if its not balanced ! If i remember correctly the start up proceduer also wont work and the problems you are getting are normal ! (uhh late :) ) Boris

maybe this pics helps you !

Hi Steve show me a pic of your setup mainly concerning the micro match plug and the adapter board. I am not sure which tab you are talking about ! Boris

What is a little annoying is that you cant reverse motor direction in the FW or not at the moment. So if you want to solder on directly with out bullet connectors check the spin direction before ! IN general it doesnt matter which motor you connect to which ESC unit, like you said "as long as...

You have two options either you rewrite the mixer table in the WKM or you do the following. Connect motors 1 6 3 8 to one herkules board and 5 2 7 4 to the other board. Reason if one board in the worst case goes down you want to at least have a quad like setup left running on the other board...

Had the luck to get my hands on some Ultra ESCs. Really looking forward to these ! Nice GUI to config the settings 10A and 35 A are going to following. If i understood correctly today they can also be used to drive brushless gimbals ! Boris

for the flashing its a specific procedure by the way. You need to hook up the USB connection choose the correct file and hit program ! Than you have to hook up a power supply to the herkules that will trigger the actual upload of the file. Switch off the power supply and check the log if all...

ah sorry didnt see you have the 3513 kv400 tigers ! go with 18 for the begging to be on the safe side but right andreas an email in the meantime what his opinion is ! Boris

Hi Beja king. The difference between AD12 and ADV18 is the timing best is write andreas an email with the motors you are using. Like i know them they tested them all and ask him which timing is best ! What exactly happen when you connect the USB dongle to the PC can you find a an FTDI com port...

oh herkules telemetry coming out for hott and jeti love it http://www.andreasbaier.de/gallery/v/Herkules+III/IMG_0852_klein.JPG.html check with andreas direkt under andreasbaier.de email contact. check globeflight main distributor http://www.globe-flight.de and ask kopterworx, if it not in...