Search results

Thank you for suggestion. Will remove them. What about propeller yoke twist in ecalc? Just select 0 on dropdown menu?

Need only for AP/AV. I'm confused now. So If i have those adapters on then is better for acrobatic or what? I thought is better for slow and stable flight?

The angle adapters increase the yawing of large MikroKopters (e.g. Okto) significantly.

Hi, I play with ecalc and try to figure out how much my MK can lift. I'm stuck with props-yoke twist. Try searching on web but nowhere strait answer. I upload 2 images with different props yoke tilts. I have motor angle adapter at...

Great. thank's for info. Let's go to work :).

Thank you for clear out. for 3rd question will do ground test to see if GPS work under cover.

I just want to clear it out when to take off and when to compass calibrate. In WKM manual (fig 1 and 2) describe two different metod when using GPS. If red blinks DO NOT Take off, other one if 2 red or one red blink READY TO GO. Which one is RIGHT? Another is compass calibration. In fig 3...

I can imagine. Similar thing happen to me a couple days a go. Try to parallel wire 2 lipo 4S battery and I don't know why or how wire serial ballancer together (Y) and parallel battery connectors, and ka buum smoke and fire, grab and threw outside as quick as possible. Yes, no joke with Lipo.

Order and waiting for them. Thank's for suggestion.

Hi there, Just return home with test results and 30A T-motor ESC as you told me Tomstoy2 not even close to warm he he, But with default GAUI motor is another story. With 5000mAh fly about 9min when I landed, motors were so hot like hell, wait for about 10 min in meantime change battery and put...

Will place outside and balanced well. Will report results. Again Thank's for all help Tomstoy2 and robvree.

Hi Tomstoy2, Thank's for quick response, really appreciate. Have t-motors 30A ESC for my new octo and I will replace and try. 30A ESC are bigger then default Gaui, so where you suggest to place then (outside of boom)?

Yes exactly. So if I replace just ESC will motors be able to fly with 2kg of total weight?

No did not convert jpeg file just use form and upload image. For suggestion about rmrc-540 cam, because have Fat shark goggle and I will try that cam. About GoPro sceleton; no just ordinary additional case and drill a hole to it :).

Hi there, As I said in previous post between 4:10 - 4:30 if I attach cam fall down. Today do same test and compare with and without Gopro. Here is weight spec: 1. Without Gopro total weight is =1.630g Fly normal for about 12min-13min with no issue. 2. Attach Gopro total weight is = 1.823g...

Hi, I have no problem uploading GoPro photo file here (img bellow). I use my Gopro for FPV and right now setup also OSD system. Found on youtube how to use Gopro as FPV cam with Live Feed video. On Gopro menu find LF (LFF = live feed off; LFO = on) and set LFO to enable that, so you don't need...

Hi, just do some test Hover in atti mode with Naza and payload, when around 4:37 sec sudden fall down (luckily from 1m). Broke just 2 props. Check voltage, mAh, amp, were ok, but motors was so hot that you could make eggs on it. Quad total weight is 2.183g. Is that cause quad to fall down? Used...

If you mean 3 Black wires that goes to motors, read in this threat, post #36 and #37...

I must cut bullet connector off if I want put wires into boom. Use Mikrokopter octo XL frame. Have small square booms. Thanks anyway for help...

Thank you. What you prefer: Solder wires (cut wire) between motors and ESC or use bullet connectors (leave longer wires)?