Search results

Thank you for info... will do that it will take about 10-20 min... :) and as you said most important "peace of mind" :)

If I replace broken RX and motors, must reprogram ESC again? Vojc

Read somewhere in forum that dji have travel limitation. You can solder some resistant on servo (serach on forum) or replace servo wheel with bigger one. That I do and encrease travel to 100 degree :).

it is ok... It doesn't matter if they sit together... if you want you can RX also put with Naza... upload some img when you done :)...

Hi, I would put Naza in or near of COD (center of gravity) and VU put on lower frame or beside to see the LED light when flying. That way you can see what is going on with your Flyer.

Thank you for your post Mactadpole. Rookie like me need for a start exactly that kind of info, for better understanding pros & cons for every different frame. If someone have some additional info, bring it on guys :). Vojc

Thanks both of you for involving in that debate. Have some airplane, just for fun, but in quad or mutiheli it will be the 2nd one. My first is GAUI 500X. Great for learning and hard landing without headache, lol. Have serious opportunity in close future to work for one of the TV stations and...

Thank you Bart to clear my head. Someone mention in other post that you build on some new mix mode Y6-8 frame or so? Like you said somewhere in the middle for GH2/T2i cam. I really not have experience which motor is right for that and use that prop and so one. Which frame is more agile, easier...

Search through forum and web about comparison Y6 and X8 and did not found any fresh info, so decide to start, because I'm planing in close future (1 month from now) buy new multicopter. Here you guys steps in with your recommendations. Want to build Y6 or octa for commercial video shooting. Will...

Now I'm confident with my little quad and put also cam mount from Alware. It is ok for a start. All weight with my cam is 2.100g huh a lot and with your battery formula I can fly for 5 min. Have 4S 3300 25C battery. Not bad. Must tell that I have accident hard landing and I didn' t know what...

Check DJI WKM manual again and yes, you are right about GPS (FIG. 1). Turn to front direction and recalibrate compass, place scrib mark on booms then hold fingers cross to make my first born flight. YES I DID IT YAHOOOO. I'm so happy like child, you know that awesome feeling in childhood that...

Hi Tom. Checked as you advice and notice that motor 3 is not align with the boom (have 3 hard landings) so tune and screwing back. Now all 4 engines have default gradient (Fig. 1). IMU arrow is pointed to the right and GPS also (Fig.2,3). Also tested by your direction and yes working fine in my...

I am stuck again. Finish the setup and go for my first fly ever, but end with 4 broke props. Notice some strange quad behavior. Because my knowledge is basic need help from expert guys on this forum again. Let's start with my error. On normal condition must be: If increase throttle stick, quad...

Tomstoy2 wrote: Sorry, find and complete that task.

hi, Wish that I could use WKM Assist. software on Android TAB (Asus eee Transformer). For now I must carry my old heavy laptop. Send Dji email and replay with this: Hi, Vojc, Thanks for supporting DJI. Now we are working on 64bit system and Mac. We have plan on Android too when we finished the...

Hi folks, Need some advice here for 3-axis cam mount. I use WKM PMU to handle power for all Quad components. I'm not sure if I could use also for manual Pitch servo? Some guy said: I have also mounted a separate BEC for powering my servos. I have 3 servos, two for the gimbal and one for the...

My fault, when programming and setup with wire also broke (hot up) pitch servo. Yeah rookie stuff he he. Thanks will do if I need it one.

They rated from 2-4S, Original Gaui 500x 18A ESC. Alware 3-Axis 450/500X Pro Camera Mount W/ SAVOX Digital Servos /Model: ALPRO3CM link:http://www.flying-hobby.com/shop/alware-3axises-450500x-pro-camera-mount-w-savox-digital-servos-p-8833.html?zenid=3k0v1h67uqt2luclfo78fqoub6 How...

Hi Tomstoy2, Thanks 100x times. You were right about ESC (look at img) they burn out. Now I'm calm, because know where the hell problem is :). Your advice about Tiger Motor 30A esc's. Unfortunately are out of stock at: http://www.clubheli.com/Tiger-Motors-30A-ESC--2A5V-BEC_p_3588.html and don't...

Hi Tomstoy2, Thank you for all effort helping me around like mentor. Will try switching motor ESC and if they wont work will buy tiger ESC as you propose. will post my progress. thx Vojec