Search results

Hi, When I turn them ON all 4 motors start with the 3 short beep and then with one beep. Also all of them slight move for about 3-5mm in direction on beeps. When I plugin all 4 direct into Futaba reciever (motor 1 into slot 1 on F8fg, then M2 into 2, etc) and start motors works fine and...

have you look here: http://www.flying-hobby.com/shop/motors-gaui-c-18_187.html

I did as you told me on ESC programming. Still no sound from motor 1 and 2. but 3 and 4 running coordinated and smooth. Then did some test and replace position (3 and 4 motor and put into M1 and M2) if maybe with WKM something wrong. when start 3 4 motors on new positions they worked smoothly...

No still struggling with setup, but with huge help from nice guy Tomstoy2 that guide me step by step... Can't imagine what will do without him... thread http://www.multirotorforums.com/showthread.php?2203-Need-help-for-GAUI-500X-WKM-GSP-and-Futaba-8FG-super&p=23487#post23487 if someone interested...

GAUI 500X with WKM GPS and autopilot and Alware 3-axis Camera mount. Buy right after new year on e-bay have huge christmas discount from really nice guy. look at: Gaui quad...

Hi and big thx again. You are the man. when ESC programing miss that step. will do it again, with pleasure. But I'm using Lipo 4s batteries? I leave programming from step 3 (Set Item Value) directly... Will do now as you said. Will post progress...

Yes it is heavy use 4s 3300 pack about 255g and camera is about 380g plus alware 440g and total weight is 1075g then add also weight of Gaui. Thanks for advice, will do that.

Just buy... nice, but when I mounted cam and pitch roll up my recording camera go jagged (jump verticaly). Don't know why? maybe weight? All payload with cam is 1.890g. Or must fine tunning servo? Really don't know still basic learner...

Nice vid. can't wait for my first FPV recording, but first come first... still struggling with setup, motors 3 and 4 wont start at the same time 1 and 2 not even a sound of them... Can show just img from my basement workshop, he he..

All done as Tomstoy2 say, and it works. First time after 10 days my face goes like :)... Just to check also upload some img. About voltage I can say thanks for advice didn't know. You right can't always rely into hi-tech. Now when I start motor with any of stick combination (WKM manual -see img)...

I think you try to say me that must pull out wire from futaba reciver cos already have power supply from MC, right? Will do all that homework tommorow it is late. Almost forget. What about PMU-ERR?

Hi Tomstoy2. You are my savior. I have. in port 8 is power supply to futaba receiver (read at the manual) is it right? 4 of them? ok. Could you explain me more like for dummies, because don't understand that. Just know what is x1 slot, pmu mc then I lost... ok I will.

hey thx for reply. Read again all manual from scratch and must admit that picture in my head is more clear now :). But one thing is still bother me. Have connect F8TG to WKM with S.Bus wire (ESC). Turn on TX (Futaba) then quad (gaui) plug USB to MC and PC, start assist. software and notice a...

Hi, Firs of all, sorry for bad english writing, not my mother language. I'm new to quads, so my knowledge is basic or even less... Reading posts all around, how to setup all that stuff together for safe fly wit gaui. Just buy my first one, non use before, quad GAUI500X+WKM GSP F8fg and Alware...