Search results

  1. skivvie

    Flexacopter w/WKM and AV130

    Here's a quick compilation of stuff I've shot so far... Mostly just messing around my neighborhood for the first half then some actual shooting for the second half. The cool stuff is yet to come but there's some decent footage here. First section is mostly GoPro, second is with Nex5n...
  2. skivvie

    Naza with HiTec Aurora 9

    On the Aurora 9 set the Channel you are using to an open AUX. So for example if you are using channel 5 on your Rx plugged into the U channel on the Naza (I have a WKM not Naza so I'm just assuming it's the same here...) then you'll set Channel 5->AUX1 in the Channels menu on the A9. Then you'll...
  3. skivvie

    DJI Zenmuse gimbal and S800 Spreading Wings preorder

    Where did you see that Boris?
  4. skivvie

    First pic of the Z15

    Requires connection to DJI FC. I was bummed as I'd hoped to also use it on a steadycam rig. =]
  5. skivvie

    DJI S800 - standing in the dark with 15" propellers

    Don't know why I feel the need to get mixed up in this, but you are paying 2k for a frame... and ESCs... and Motors... and Props... with all wiring done, plug and play. Are there any comparable 800mm ARTF at that price? Not trying to be confrontational, I'm genuinely curious if there is anything...
  6. skivvie

    Naza with HiTec Aurora 9

    Definitely setup the fail safe on your Rx. Set it to just below hover on throttle and center the right stick so If the Naza blinks out, the RX will still have the fail safe ability to slowly descend to the ground. Odds are slim but backup your backup ;-)
  7. skivvie

    Naza with HiTec Aurora 9

    I have the flight modes on a three position and fail safe setup on a two position switch.... Just setup a p-mix with an unused aux channel -> channel you are using for mode switch, let's say it's aux1. So pmix aux5->aux1 and set the OST to 30% or so and set the switch to whichever two way switch...
  8. skivvie

    AnakA System

    Do you have video to prove that statement? If you can come close to direct drive motors with that setup I'd love to see it.
  9. skivvie

    S800 Leg Brace Issue

    http://www.multirotorforums.com/showthread.php?3785-Battery-tray-for-DJI-s800&p=43162&viewfull=1#post43162 There's other threads with reasonably close up shots.
  10. skivvie

    Sony Nex-5n - downlink

    Good to know... Maybe it would take a 2S after all?.. But that potentially 8.4V... Just to note, the ImmersionRC 600mW Tx definitely supplies 5v out (I measured it at 4.9 ish) and 300mA max.
  11. skivvie

    Batteries and tray for the S-800

    Anyone else care to chime in on what they are running on their S800? I think it might be time to pull mine out of the case and I need some power! What would the max weight for batteries be if the Zenmuse is 1.6KG with camera? I can't figure out the specs on the DJI site... is the Frame total...
  12. skivvie

    Photohigher skyline rsgs

    That was posted yesterdayish... Read back in the thread already a few folks trying it. :tennis:
  13. skivvie

    Sony Nex-5n - downlink

    No power specs means stick to what you know it can handle, which is 5v that would normally be supplied by the USB connection. If you go much over that then you risk blowing it out, but of you are willing to risk it go for it... I'm sure there's at least some leeway. That said, I'd wager a 3S...
  14. skivvie

    Xoar precision pairs on Cinestar 8

    I was hoping to try out the 13x6.5. Mario, the maker of the Flexacopter frame I have, uses them and seems to like them... actually I think he said he's using 13x6... don't know how much difference that would make. Hmm... lots of $ to plop on props hoping they work better than the 11x5 Graups...
  15. skivvie

    Photohigher skyline rsgs

    Anyone else not looking as forward to receiving their preorder as me? Being a beta tester for this gear and paying for the privilege isn't my idea of awesome. After putting all this work into the hardware, a complete well described manual should be required before release if PH wants people to...
  16. skivvie

    Xoar precision pairs on Cinestar 8

    What size Xoars are you using?
  17. skivvie

    Firm Ware 5.08

    The heli toilet bowled at times... meaning it would fly a small circle around a center point when doing a position hold in GPS mode. Lowering my disturbed gain to 90% and lowering my Yaw gain seems to have cured it.
  18. skivvie

    Firm Ware 5.08

    I finally got 5.08 dialed in today after much tweaking. It's now very stable in light wind, I have yet to try it in higher winds so grain of salt there. I did have the random yaw issue yesterday that Yuri had and it freaked me out but whatever I tweaked today seems to have gotten rid of that and...
  19. skivvie

    Zenmuse Manual/control software now up

    Yeah the "mandatory" manual settings are a puzzler eh? I don't get it. Can anyone explain why they would be mandatory? What is the performance hit if you us Auto anything? Weird and pushing me away faster and faster...
  20. skivvie

    Wire sizes help please.....

    another: http://circuitwizard.bluesea.com/
Top