Search results

I live in Vancouver, BC ,Canada! EH Thanks man, ive heard as many good things about APC as graupner's

ill chek it out, I used some other 3m tape i have ... same thickness as stuff dji gives but superior grabbyness

Where do u guys buy APC Sent from my GT-I9100M using Tapatalk

I have found since ive been flying my F550 WKM with its payload on, and which i believe to be beautifully balance on x and y axis, it doesnt rock forward or back on any of the arms i balance from. But i have a slight forward drift in atti that needs a slight ampount of constant input to correct...

Suggested from helifreak that i bind with no sensors plugged in, did that, powered down plugged in volt and temp powered up and all is well. Thanks for the insight tho Sent from my GT-I9100M using Tapatalk

Hey ED, are you flying bare bones or pulling some weight around? im trying to sort gains out myself for a solid wobble less/free hover, mind you my 550 is AUW 2025g on 10" graup's 4s

Happy flyin man! Sent from my GT-I9100M using Tapatalk

Also make sure there is 100% dual rate. Even a fee points and the sticks wont be in the correct position to arm. Im assuming you have properly selected motor config in software and hit write Sent from my GT-I9100M using Tapatalk

I have bought a tm 1000 to go with my ar8000. It will bind ans function fine, but if i power everything down then on again it is not keeping the bind, rx/sat have a fast blink WKM shows fast red led for no connection and no response from radio input, rebind all is well power down, repeat lol...

Nex5n is discontinued. What another good option at that price point in a lighter weight dslr type? Sent from my GT-I9100M using Tapatalk

Im using xaircraft 650landing gear and the xaircraft gopro gimbal Sent from my GT-I9100M using Tapatalk

I drilled through the base of my 550, slightly oversized holes, a light coat of liquid elec. Tape and then fed the screes through... So far so good Sent from my GT-I9100M using Tapatalk

Ive had no issues either, ive made 2 or 3 orders and all have arrived as needed, I was short a spare arm one time but was prompt about gettin it out... Good stuff

Anywhere un US or Canada to grab one of those lights? Google left me empty handed when i searched Sent from my GT-I9100M using Tapatalk

ill likely try the gentles suggestion thanks guys, im not a fine electronics soldering guru lol... I can solder all on 16 guage all day long though haha. For the IR setup do you guys just run it aff an auxilary channel and setup a switch? I could use Aux1 on my ar8000 and map it to one of my...

Hey there, I am getting my self a nex5n for regular use and to throw on my gimbal for pic and vid aside from my wide angle gopro video that im getting tired of.... Question is how do I organize taking pictures, do i need a remote shutter setup of somesort? all new to me just dont want 500...

I have the eos 720inet, great charger/blanacer however i had to buy an hp hotswap power supply to get nice charge rates on my 6s, however a deep cycle battery will do the same.... The duo is the same charger with the ability to charge two batteries at once, know also that too do so at a good...

Heres where im at on this setup now... gopro at 720/60, im finding i have some trouble getting a super solid hover.... im confident in my gps/imu measurement but im at only 110 in basic and 80 atti gains, i have em set up on my transmitter but its almost as i need to go lower which i find...

http://www.youtube.com/watch?v=NXpg1T5RHxQ Heres what i shot, Wookong gains 110,110,120,125 Attitude 80,80..... still want the hexa to b a bit more stable, lus i cant tell if the gimbal is overcorrecting or not lol... all new to me, planty of messin around ahead, that was on graupner 10,s 4s

Grapner 10" fit right on no problem. Grapnuer 9" i had to drill out half the shaft hole because it stepped in... Easy fix though. I ended up flying the 10's with a 4s on my 550 setup Sent from my GT-I9100M using Tapatalk