Search results

Exactly.Got my third sets of props today.1337,thinner style like my original 1335's.The 1447 were dreadful.the 1447 caused major instability in light wind and decending.With the 1335 and 1337 props I can decend fairly quickly and the quad is overall rock solid.The quad is a rocket with these...

I think you know what I want to accomplish.Basically I want 2 custom gain settings that I create in the naza software.Then I assign one of these custom settings to a toggle switch.Then when I fly in manual mode I can switch to the gain setting that I created in the naza software specifically for...

like title says.I have not had any luck finding a guide to do this.I have figured out the taranis for the most part.I have 3 flight modes on one switch and a seperate failsafe override on a 2 way switch.What I want to do is have 2 seperate gain settings onto one switch.This way I can have 2...

I upped the gains 10%,and upped idle speed one notch in software.Charger just beeped.Well see.;)

After researching the topic fliers said use to use intelligent as to decrease the chance of motors turning off during flight.I will set to immediate if this will remedy the problem.I think it may be the new props.It never happened with the 1355.Today with new 14x4.7 it happened (vrs)perhaps if...

Like title says sticks to bottom inwards center doesnt cut motors when quad is tipped over.I semi recovered out of a death wobble(VRS).didnt land too hard but came down side ways and landed on its right side with right side arms holding touching ground As soon as touchdown i had sticks at the...

I got the same,but 5000mah.If I could find 7000mah from a canadian retailer I probaly would of bought.I try to buy canadian whenever possible.

*Read my posts carefully*.I have a tendancy to be confusing:confused: Curious as to what others have this set to when arming motors.I have mine set to the lowest.They spool up instantly and have low rpm idling.This is what I want.I find I need at least 85% throttle to take off then I ease back...

Nope.1 thunderpower and 1 tatu.If I like the tatu I will get another.If the thunderpower doesnt cut it I will be set aside for my ZMR 250 build.I paid $98.00 cad for the tatu.Not bad I think?Genace supposidly makes Tatu?.Do you have a goto brand,or pricepoint.

I only have ONE 4300.I was thinking that when purchasing. but its also double the weight.

Decided against the 3300mAh and have 2 lipos thunder power 4s 4300 mah 35 c and a Tattu 5000mAh 4S 35C on its way. Not worried about the tatu.Both are 35c which is fine.Probaly get a bit longer flight out of the 5000mah,but then it does weigh more.I think Im good to go.Thanks for the reply...

I have never been tagged with duty.Guess Im lucky.

Thanks for the tip.Dhl snags us canadians with duty/customs fees.USPS handoff to canadapost is the way to go for us Canadians.I would never use DHL or UPS.I have never been tagged with the duty,then agian I have never used ups or dhl.I have ordered 10s of thousands of $ from the states so I...

Sounds good.I just found some carbon 1447.they have a round more paddle like appearance that I see tarot users have.They are $20.00 for 1 set.The only way to get a good config is to test personally.No rush for the props though.Go figure I have the week off and no lipos till friday:(

I ordered 2 thunderpower 4s 5000 mah yesterday.I came across a good priced 3300mAh 70~130C 4S.Would 3300mAh cut it,or would the flight times not be worth it.Thanks if I have posted in wrong place. I realize battery life has many variables,but in general is 3300mAh recommended for a barebone 650...

I know this(6s would toast your motors).My future upgrade will consist of 6S rated motors and esc's.I wasnt saying I was going to try and use a 6S battery with my current sunnyskys.

Not much luck finding 14.7'' props.xoar is pricey,I realize the quality/price point but..I dont want to spend $50.00 dollars a prop either.I would prefer a canadian supplier aswell.Perhaps you have a retailer that you have used in the past besides foxtech?.You mention CF not ridgid enough?

And esc's.But thats for the future .Just gonna enjoy my build that I am quite pleased with.When I decide to carry any gear then I will have to upgrade though.I am curently researching powerful motors and esc's,props and battery configs.Those 580kv will have use for something else.No doubt...

The pic is T-motor stylr 1355.I have ordered 1365 single hole which will be attached with sleeves and a nylock.So what do you suggest for a slightly better loiter to throttle %.This copter is amazing with the 1355 as shown in pic,but just want a little bit more punch.I was thinking of going to a...

Thats exactly what I am looking for.The guys swinging 17'' on a 650/680 may have nice/longer hover time,but from what I have read the quad is mushy.My setup is perfect.Stable,responsive and with these props it should have that little extra punch.Thanks btw for responding.I will post back with...