Search results

I was leaning towards 2 bats for that very reason .I have a tuttu 5000 35 c with about 10 charges,can I run a new identical battery with this or should both identical batteries be brand new when pairing.I charge all my bats @ 1 amp and never go below 3.8 volts.I charge my smaller 3s 500 mah @...

I pretty much have all the bases covered in the prop department.Next will be running 2 identical 5000 mah or I may get one 10,000 mah.I do realize double battery capacity doesnt equal double time.If I get more then 10 mins I will be happy.As my flight times are know I cant really fly any further...

The more opinions the better,to an extent.;)

I see.Guess best to stick with the 50% rule.

I tried another prop combo again.(6.5 @48/50 % loiter)-(5.5 @60/65% loiter) Both manual mode naza.I read somewhere that more throttle over 50%,to an extent is more effecient then 50% or under.At 65% there is still plenty of head room so this kinda makes sense.Could someone perhaps elaborate on...

I realize that know.Thanks

Tarot 650.I switched to 10'' inch props and its much better.My wimpy motors werent designed for large props like I was using.I may try 9''aswell.Thanks for the tip.

Solved problem by switching to 10'' props.I may try 9'' later and it should be even better.Thanks for response!

Vibrations is reason enough to mount to body and the fact that this will be first time with fpv.Also seeing some of my quad may make it easier to have some reference to as disatnce in relation to surrounding space.Thanks for the reply

I have seen it mounted to main body and out front on the boom.From a inexperienced users point of view would one location be better then the other.Would bieng able to see some of the front of my machine perhaps make it easier in some way?.Perhaps advantages/disadvantages to seeing some of the...

Like title says.I have basic and Atti gains onto S1/S2 on taranis.I have tried all possible combinations,calibrated compass,done the dance but my quad is totally useless in gps mode in the wind,ANY wind.Loitering is out of the question with out severe wobbling that would certainly cause a...

Yeah.Been reading over at fpvlab.Some say good others say problems.It seems that no matter what the problem is the firmware is to blame no matter what version.I personally think flyaways and other issues are user errors,panicking,flipping improper switches and not knowing the basic behaviour of...

Currently 2.02 and no issues,rock solid.If I do upgrade do I have to reconfigure my taranis for the switches and modes to work correctly?

*SOLVED* I have successfully set attitude gain remote adjust to dial S2-X2 Channel 6 (attitude gain) I cannot get S1-X1 to work channel 5 basic gain remote adjust See pic.Green I got working.Red not working I have setup channel 5/6 the same way and rechecked. Any suggestions would be great...

I decided to have 3 expos on one switch (SA)Roll/Ail Normal default switch up Weight (100%) expo default (Gps-atti flying) Med switch middle Weight (75%) expo 20 (manual flying) low switch down Weight (50%) expo 20 (manual flying) Now I want to set remote gain to Basic gain to S1 dial...

forwards/backwards and throttle isnt really the issue in manual as much as roll.basically I just want a toned down endpoint for roll.Should be simple enough once I have the switch allocated and then I can play with the number.from the video I will start with 60 then either go up or down as 100...

I am going to setup dual rate switches in taranis.One for atti,another for manual.From the vid I have seen It should do what I need.If it doesnt work/do what I want then I will figure out how to setup end points.

Okay,I guess.I suppose endpoints in the TX as In Manual mode the software passes all the signals from your sticks 1:1 to the esc's.Correct?. No worries,lots of guides and info out there.This is another reason I got a naza.lots of guides,documentation and help out there.

I agreed with you, then gave you details on my quad setup.Just excited and happy that this thing is shaping up nicely.He had/has 3 naza configs set to one taranis switch.What he wanted to do is go one step further and be able to tweek those individual settings on the fly.tweeking the gains on...

This fella set it up,I think? http://multirotorforums.com/threads/gains-setup-with-switches.23359/