Search results

Purchase it 4 years ago as a cheap version of dragan flyer, with high expectation to bring a good flight performance. Sadly FC1212P wasn't ready at that time, 2 total lost, 2 succesfully build with good flight performance (DJI controler). Basicly its a good concept, very practical for...

looks promising. how many waypoint? when it will release? Now I have option between Ys x8 - super X. I have experienced with old FC 1212 P

Thanks for your advice, it's works Finaly I hit the spot on roll & pan axis. Here's the result : https://vimeo.com/72953207

Yes, gimbal motor can handle any imbalance up to a certain weight. But I prefere to balance it perfectly, so it can perform good. Especially during FFF or high wind situation. Im using 5010 motor, its very close to motor power limit to handle 5D, so perfect balance is a must. Next week I will...

I found a big drawback of BGC, we can't swap lenses frequently because gimbal COG has to be balance perfectly(took more time compare to servos), upload PID parameter. Using a zoom lens won't help. Changing focal lenght/zooming will move lens barrel, COG will change. Unless you have identical MR...

for big defferent of weight, we have to completely retune PID & lower power.

Tuning a 3 axis brushless gimbal with canon 5D, using 24mm(non image stabilizer version). Camera framing are stable, even 3rd axis still off https://vimeo.com/72953207 Ary

Im looking for the best video transmiter for MR range 150m-1km (clean & crisp signal) As far as I know Mondo stinger is the best for 5.8 ghz, Teradek boltz WSDI pro wifi (clean signal, but limited upto 300ft) & visilink are the ultimate(use for Moto GP & F1) any suggestions/experience with...

Im using RC Timer Gimbal Brushless Motor 5010 / 0.21mm / 150T with 3s battery. It's not enough during fast forward flight (FFF). Im using Canon 5D Is it possible to plug it with 4s battery? Need more torque....

It might work. I have experience using double tape with less rubber/ sponge double tape more effective to absorb vibration. I can set higher gain on simple bgc sofware

Well, now I can use my 14mm pancake lens without jitter. Thats the different. also try experiment with P & D setting.

Front side is closed

I use highlight marker. cut 1/2.

I got much improvement by doing this. Put IMU inside plastic tube (it will eliminate wind disturbance to IMU during FFF) & Using foam tape. Im using GH3 +14mm pancake.

I got 16 min. (On telemetri still 21.5v before landing) with my X8(5.25 kg). WKM, T-Motor 4014 330 kv, 14.47 wood(thin E), 2 Pulse 5500mah 45C Very stable in highwinds Ary

Tq Chris

Im looking for 6 pairs of Tiger Motor Carbon Prop 15×5.5 or 15x5 for my X8 Any info to get those? Pls PM/reply TQ

try www.upcamera.com. they have 3 axis bgc. Contact Giordano, he made a custom for my GH3. He has alex mos board instock. Good service

Agree, I have turned down several jobs from ignorant clien. Safety first!

aye