Search results

It flew nice & precise. No return home fail. But, it's still sitting on my sofa. Can't put it on my octo+heavy rig. I still need a course lock/home lock. What can we do if esc fail/prop break/motor fail?

4. Home lock/course lock. For emergency (prop broke or esc fail)

interesting to see tilt angle on motor mount.

check : - your esc's calibration. - bolts on motor motor mount. if it too long, too close to coper wires(pict shown), it will interfere motor performance(unstable rpm) Im using 4014 11 kv 330 with 17 inch Tprop, it flew perfect ary

yes aicy, U8 100kv/kv 130 for shure

...let the FC handle it... do you means you are using WKM custom motor mixer? Would you share your custom motor mixer set up? thx

with X configuration you can use larger props than flat 8. Larger props with lower KV motor=more flight time

off camera topic, its about Besteady gimbals, I saw it in my friend store. Its a good build. But one thing is missing, There are no bearing support for roll axis. Bearing support are very important if you carry a heavy camera like 5D/BMCC/above 1kg. Motor bearing cant take all that weight &...

What do you think about this : http://www.foxtechfpv.com/dualsky-xm7010mr65-kv370-short-shaft-p-1200.html and this : http://www.foxtechfpv.com/foxtech-motor-w6135-kv330-cwccw-combo-p-1164.html or just strait to the top with U series T-motor, like kopterworx did for their new heavy lifter...

congrats...

DYS 40A simonk V2 are a good combination with 330kv motor. I also use on my large hexa with 3515 kv 400, no problem

Nope.. my octo just survived from 3 days rough assigment, mostly in high wind situation. I have to flight full speed forward as DOP/client request

Im using TMotor 4014 340kv with TMotor prop 17X5.8 v2. Esc DYS 40A simonk V2. My X8 15.2-15.5(6.9 kg-7 kg) lbs with 5D+small fix lens & 2X 5500mah 6s 35C. I got easy 12 min or more in slow flight. Full speed flight 8 min. Landing every 12.6v just survived 3 days assignment(6-8 flight per day)...

Cool.. new videos?

Thx Pete

A2 kiler!!! I also have a new project using Superx with RC Tiger Motor new U Power series U8 100kv water prof. motor + 29 inch tiger prop Min. 1hr flight time quad Here U8 spec they send to me I will wait until they release waypoint. Hopefully not too long, otherwise I will switch to YS (zero...

Found it.. http://shop.easyelox.de/alu-schrauben-schwarz Looks nice for M4 type price are between 0.99 - 1.19 euro per piece Just try to figure out to order it, I dont understand Deutch I also find several chinese supplier via alibaba.com. It's cheaper, but not sure wich has good product

Lighter quad = more flight time = more nimble quad/better performance During high speed manuvers, our quad weight will doubles/more I will try to put a lighter component with best quality as many as I can. It is important for me.

I need Titanium M3 40mm Bolts & nuts for my quad any info supplier/hobby shop? ary

Hi, I want to sell Naza V2 & V1 used, V2(less than dozen flight). All including GPS Both perform perfect/no error in any flight. Last set up on hexa 5kg++ Please PM me for best offer Ary