Search results

Would this be any good for a FPV system? http://www.ebay.com/itm/5-8G-FPV-200mW-Audio-video-Transmitting-receiving-System-FV-FV5802-/290805358108?pt=US_Character_Radio_Control_Toys&hash=item43b5599e1c

First off why does it take the naza GPS so long to go into calibration mode? Seems like forever switching back and forth from GPS to Man. I positioned the gps according to my declination of 0 Deg 46' and finally the orange like came on and I did the recalibration. And I still have the TBE. Do I...

The pin side on the connectors from the esc should face to the right side side of the naza if your are looking headon into the front correct?

Is the IOC worth using on a 2 position switch. I only have "off" position and "Home Lock" position. Another question is what do people use the IOC for?

Anyone know what the weight of the F550 assemble without battery would be total? I have tried to add mine up with the battery and landing gear I get 1065.6 grams-2.34 lbs. I am using this landing gear http://www.aeroxcraft.com/index.php?...180f1cf968dd0a

I'm thinking about buying these motors for my DJI F550 Hexcopter. http://www.foxtechfpv.com/tmotor-221...tor-p-537.html Any one have any opinions on these motors? I have a 30 Amp esc on the hexa and I believe these motors use a 20 Amp so my esc would be an over kill but would work. I'm...

What do you guys think about these motors on a hexcopter? http://rctimer.com/index.php?gOo=goods_details.dwt&goodsid=121&productname

I connect my naza gps to the laptop and open assist. then load newest version firmware and software , Recalibrate everything but my GPS calibration does not show up in the program. Any suggestions?

My GPS and AR7010 arrived yesterday and last nite I was reconnecting the naza to the rx the same as it was connected to the AR610E that did not have a preset failsafe. A to Ale T to Throddle R to Rudder E to Elev U should be pulgged into the gear channel on my rx to make a 3 psoition switch...

Does anyone have a video of setting up this on a DX7? I"m kinda confused about how to setup my switches. Thanks

I bought these from RcTimer and I noticed that the hub thickness is not 9,75 but 6.85. At the dimension I think I still have enough thread in the nut to get it good and tight. Has anyone used this type of 8x4.5 props? Thanks

Will increasing my gains help stop the craft from wondering so much? Right now I run 145,145,130, 145 Att, 100 & 100. So if I run them up to say 160 or higher it should hold a tighter pattern.? Or do i have this all wrong?

Anyone using homemade landing gear? Any pics or discription of what you are using?

I have a DJI F550 that does not have stock motors. They I think are RCTimer BL2830/11 1000Kv with a motor shaft of 3.17mm using a collet screw with a screew size of 4.80mm. So do the props come with plastic adapters to reduce the prop hole size to fit my needs? And all I need to concern myself...

Couple of weeks back someone posted a vibration mount for a camera that was home made and sold on ebay. I have been trying to fine that post but no luck. Anyone know or seen that post maybe? Thanks Chalagi

Would these props work and are the 8" props? http://www.hobby-wing.com/dji-8045-propeller.html

Was flyig yesterday and I reached out and touched one of the white arms and it has vibration quite a bit. So this evening I tried the Mioor with the laser pointer on each arm by relectig the laser off the mirro onto a white objest. The round do never changed shape enough to where you could say...

How is the best/easiest way to balance the motors on the F550? The company that asembled my F550 balanced the props but not the motors. Yesterdy I reset the gains down some and when I touched one of the arms I could feel quiet a bit of vibration. Would it be possible to disconnect all the motors...

Why is there 2 different vertical settings in the autopilot section? I know one is set for Attitude, so would the other be set for vertical in the manual mode? So for so many questions but this thing is not like a collective pitch helicopter. I would also assume that its ok to use trm like in a...

This is the first video of my F550 still test flying some. http://youtu.be/juYOY5Ddfi4 Does the 550 in the video look as though its flyig ok?