Search results

This morning I spooled up the 550 into a hover. Which was not very stable (As in staying in one place). I twas moving about some as to where I had to always give it some input. Wind this morning was pretty calm also. These are my settings. Pitch------140 Roll-------140 Yaw------120...

I see some F550 flame wheels with a lighted top dome. Are those made for the F550 or do they have to be customer mounted. Also is there a link the the domes.

Is it worth the time and money to add a GPS to my F550 and naza? Thanks Chalagi

I have a Spektrum DX7 and a AR6100e reviever and I have not been able to set my failsafe mode on my F550. Att and norm mode are asigned to the gear switch but I can't get the slider to move to the failsafe and turn it blue. Any suggestion other than buying another reviever?

Some props have the 10x4.5 R marked on the top side, sooooo the "R" meaning reverse (CCW)? Also is it safe and can I run 4S batteries with the 10" props? The 3S batteries seem to not have enough power for the 10" props. As a matter of fact the F550 running on a 3S system seems to be very short...

I spooled up the 550 and took to the air this afternoon. The hexa flew very nicely and was pretty stable on the settings that I entered in the autopilot. My settings aew as follws: Pitch=110 Roll=110 Yaw=110 Vertical=110 Att. mode: Roll=80 Pitch=80 25C 3S 2200 Mah (Could use a bigger battery)...

How to tell if the are upside down or right side up? They look the same either way

Does anyone have some autopilot settings they could share with me to use as a starting point or can I set them to a "default" setting? I hate to fly this thing not really knowing what to expect. Thanks Chalagi

Going through the naza F550 setup the package came with an AR6100E rx and I use a spektrun DX7 tx, so I don't think I can't set a "Fail safe" position on my F550 am I correct in saying this? The spektrum DX 7 has a smartsafe but not a failsafe. So if my signal is lost will the craft land the...

I have ordered a DJI Flamewheel F550 and looking over the setup assistent I see 6 different selections: Quad rotor I Quad rotor X Hex rotor I Hex rotor V Hex rotor IY Hex rotor Y So which of the "Hex" rotors do I choose? Thinking maybe the "I"

Been searching on youtube for a setup or two for the DJI and DX7 and it seems that everyone is using a DX8 or DX6i. So I guess I will just give it a shot and see what happens. Pst a link if you guys know of any for the DX7.

I"m in the process of making a homemade prop balancer and I would like to know the inside hub diameter on stock props that come with the DJI F550. Thanks Chalagi

Are the props like normal props on other RC models that need balancing also. Are do they come pretty well balanced from the factory. I know I always have to balance the blades on every helicopter that I own so I guees they are no different correct? Thanks Chalagi

Does anyone have any simple (Homemade) and cheap camera mounts for the GoPro that you use on you DJI F550? Mounts to build or mounts from a dealer. Thanks Chalagi

Hello, I"m from Arkansas and new to quads. I have had an interest in the quads every since they hit the market. I normally fly T-Rex 450 and 500 helicopters so this will be a big change for me. And I also know that I will have tons of questions so please bare with me please. My F550 has not...