Search results

  1. C

    3DR Pixhawk and Taranis

    Does anyone here use a Taranis and 3DR Pixhawk? I"m looking for a Eepeom that I can use as a standard to setup my Tarot 680MM Pro. I have been reading some on the web and have really gotten myself very confused. Some don't even make sense as far as making then even work.
  2. C

    Naza M Lite on Tarot 680?

    Anyone here us a Naza M Lite on a Tarot 680MM? And are you having good results?
  3. C

    Tarot triple 680MM plates

    Any Tarot 680MM hexa that uses triple plates mostly for the esc placement? Also on the 680MM does anyone replace the standard 10MM carbon camera rail tubing for longer tubing to get the props and arms out of the camera view?
  4. C

    Naza M Lite

    Well it looks like I need to replace my old Naza M V1. So will this Naza M Lite work with the old Naza M V1 pmu and gps?
  5. C

    Tarot 680MM Pro Help

    Out of all the other forums I hope I get lucky here. This is about to drive me crazy for sure and I have tried just about every thing I can think of to solve the problem so here goes. Whats crazy is #1 motors starts up no problem the other 5 will not. I have conductivity on both the negative...
  6. C

    LED Voltmeter

    Is there a place state side to buy a voltmeter like this one? http://dx.com/p/diy-0-28-3-digit-red-led-digital-voltmeter-black-green-2-5-30v-230113 All the searching I have done keeps pulling up China. I"m really tire of sending money to China and waiting weeks on a product.
  7. C

    FPV Monitor

    Looking for a place to buy an FPV LCD color monitor (No blue screen) to make a ground station. Price range between $50 and $100 bucks (Cheap retired man lolololol)
  8. C

    Carbon core X4 650 Quaad

    Looking for landing gear bought or homemade for my CC X4 650 that will not break the bank. The factory gear is just plain out of reach as far as the price goes. They are asking as much or more for the gear than the complete frame.
  9. C

    APC 12x6 thin Electric

    Does anyone use these props on any multirotors that has an AUW of 2200g plus?
  10. C

    Carbon core 650 quad

    When spooling up the quad #3 motors does not catch up until over 50% but after that it's running normal when I bring it back to 50%. As I increase throttle on the tx the quad just sits there even at 75% throttle. Props are spinning correctly and they are not upside down. The gains on my naza...
  11. C

    Calibrating Naza GPS

    Before starting the calibration on the naza gps do you have to wait until the quad has gone completely threw its initializations process in acquiring the satellites? Or can you start the calibrations right when it first starts the lights?
  12. C

    Less than 100% Aileron

    In the naza assistant why would my Aileron not have 100% both ways? All sticks center up in the naza including the aileron.
  13. C

    Web site service -- RCDrones.com

    Has or is anyone having trouble getting connected to rc drones? After you order something its like they don't exist any more. I have sent e-mails number of times and called a lot and nothing. They have left 4 parts out of the package that my frame came in and that's all I need to complete my...
  14. C

    Hot speed controllers

    I have a DJI F550 hexa running AMP2814 motors with 11"-4.7 props and 30Amp esc's. I have a full FPV setup with transmitter, 600TVL camera and gopro hero3 using a 3S 5000 battery. After 5 minutes of hover the esc's are hot as in uncomfortable to where you can only hold your fingers on...
  15. C

    AMP2814 motor testing

    Test video of the AMP2814 motors. Looks like I have some vibs and a little bit of jello now since the motor change over. Still trying to figure out whats making that funny sound. Sounds kinda like playing cards in the spokes of a bicycle wheel. Seems that every time I hear that noise in...
  16. C

    RCTimer 30Amp esc

    I have soldered 4-30Amp rctimer simonk esc's to the F450. I used my DX7 to bind the rx to it. I connected the esc's to a 8-way splitter to calibrate 4 at one time then connected it to the thro on the rx. I turned on the tx and raised the thro all the way up and then I connected the battery to...
  17. C

    RCTimer Ordering

    Whats the best shipping selection for rctimer products? Would it be the "Airmail" or the "Express mail"? Airmail is $2.00 to my door and Express mail id $28.00. I live in the South central USA Thanks
  18. C

    AV cable

    Where can I get a cable like this one but only much longer http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=107&products_id=906 I would like to try and hook my FPV goggles to my portable DVD player that has av in and av out Thanks
  19. C

    Head Tracker goggles

    I have a head tracker in the goggles that I have right now. I was wondering if it will work with my DX7. I think it takes a better tx than what I"m using right now but not sure. The camera that came with the kit is setup for head tracking. Thanks
  20. C

    Fatsark COMS Camera

    Does anyone use this camera with the Fatshaek ImmersionRC 600mW tx? Sorry ment to say CMOS camera Thanks
Top