Hi there guys,
I have a F550 RTF with fpv from electronicarc.com, but I star to feel the need for something better.
I'm thinking in a Hexa frame to fly a sony nex5 with dual operator on a 3 axis gimbal.
This is the configuration I thought about:
6 x Helice Graupner E-Prop 12x6 (Graup 12x6)
6 x Helice Graupner E-Prop 12x6 L (GIRO INVERSO) (Graup 12x6L)
1 x Dji NAZA M V.2 + PMU + Led + GPS V.2 Combo (NazaM V.2 GP)
1 x Tarot Iron Man 690S Hexa Plegable (TL68C01)
6 x Regulador T-Motor 40Amp. 400Hz (2-6S) (40A T-Motor)
6 x T-Motor MT2814 770 RPM (110 gr.) (MT2814 770 R)
1 x Gimbal Brushless Monobrazo 3 EJES, 100% Montado Tipo Nex7 (RTF Mon 3AXI)
1 x Graupner MZ 18 HOTT, 9 Canales, Tactil, Color, 3.5" (MZ18)
4 x Lipo 4S 5000 mAh 20-30C (4S 5000)
I already have a turnigy 9xr with a monitor ( that I use on my f550) and I thinking using it for the camera operator.
so my questions are:
- which landing gear should I used with this gimbal?
- is there any thing that I need to this kit( wires, recivers, etc etc)
- do you think this is a good setup ?
All the gear can been seen on www.electronicarc.com
sinse i'm Portuguese this is the best shop for me.
thank you all
I have a F550 RTF with fpv from electronicarc.com, but I star to feel the need for something better.
I'm thinking in a Hexa frame to fly a sony nex5 with dual operator on a 3 axis gimbal.
This is the configuration I thought about:
6 x Helice Graupner E-Prop 12x6 (Graup 12x6)
6 x Helice Graupner E-Prop 12x6 L (GIRO INVERSO) (Graup 12x6L)
1 x Dji NAZA M V.2 + PMU + Led + GPS V.2 Combo (NazaM V.2 GP)
1 x Tarot Iron Man 690S Hexa Plegable (TL68C01)
6 x Regulador T-Motor 40Amp. 400Hz (2-6S) (40A T-Motor)
6 x T-Motor MT2814 770 RPM (110 gr.) (MT2814 770 R)
1 x Gimbal Brushless Monobrazo 3 EJES, 100% Montado Tipo Nex7 (RTF Mon 3AXI)
1 x Graupner MZ 18 HOTT, 9 Canales, Tactil, Color, 3.5" (MZ18)
4 x Lipo 4S 5000 mAh 20-30C (4S 5000)
I already have a turnigy 9xr with a monitor ( that I use on my f550) and I thinking using it for the camera operator.
so my questions are:
- which landing gear should I used with this gimbal?
- is there any thing that I need to this kit( wires, recivers, etc etc)
- do you think this is a good setup ?
All the gear can been seen on www.electronicarc.com
sinse i'm Portuguese this is the best shop for me.
thank you all