Search results

  1. Giovanni59

    For Sale Hexacrafter HC800 Heavy Lifter Custom Built UAV

    You are looking at a custom built UAV purchased and assembled in 2013. The manufacturer of the frame is Hexacrafter. This is a heavy lifter UAV that can be fitted with a multiple of various gimbals to lift large, high end cameras. Right now it is fitted with the Hexacrafter HC2 camera gimbal...
  2. Giovanni59

    FAA Announces Small UAS Registration Rule

    What's up with people posting advertisements here?
  3. Giovanni59

    DJI Zenmuse Z15 GH4 & Lightbridge

    I have learned from several sources that it is possible to run both Lightbridge and Zenmuse but not have Lightbridge control the Flight Control. I have heard of incidents where this has caused problems and crashes. So I have Zenmuse connected as instructed except no Sbus connection. When...
  4. Giovanni59

    Zenmuse GH4 Set Up

    I have worked out most issues and am now searching why I cannot get picture through zenmuse and Lightbridge.. I hooked up an hdmi cable directly out of the camera into lightbridge and I get a picture on the ground station but not when I go through the installed hdmi cable that goes through...
  5. Giovanni59

    NAZA Startup LED Meanings - Explained

    I guess if I didn't crash into the golf course lake the next test would be to try another radio RX, the DX9 is brand new and works beautifully with my other craft. Thanks
  6. Giovanni59

    Zenmuse Z15-GH4 HD 3-Axis Gimbal for Panasonic GH3/GH4

    Since you are missing parts would you sell the gcu for $50? Thanks
  7. Giovanni59

    DJI Zenmuse Z15N with Sony A6000 - HDMI Cable

    My issue is different. I am connecting GH4 camera with HDMI out directly into Lightbridge, I do not want Lightbridge to control the FC. I need to remove the built in HDMI cable but when I remove the bottom plate the cable is hard wires into the circuit board, no way to disconnect. Maybe your...
  8. Giovanni59

    Zenmuse GH4 Set Up

    Bart, I am having trouble figuring out how ans where to mount the Lightbridge TX in conjunction with the Zenmuse GCU. Do you know of any build photos that can help?
  9. Giovanni59

    Zenmuse GH4 Set Up

    I forgot I had this great mini ratchet that get's in there really good. Just have to be careful I don't tighten too much and break the screw. Balance is perfect now. Thanks
  10. Giovanni59

    Zenmuse GH4 Set Up

    Here is the video. I see now what to loosen to rotate the horizontal bar down. I then need to change the angles of the arms so they are parallel with horizon. The 2mm hex screws are hard to get to, I don't have a long 2mm
  11. Giovanni59

    Zenmuse GH4 Set Up

    The camera is completely the way it came with the Olympus lens. It seems that the camera is too high, top heavy in terms of COG. I am not seeing where the adjustment is for roll, but then I still have the camera mounted, I will take it off and inspect. Pitch balance seems pretty good. What...
  12. Giovanni59

    Zenmuse GH4 Set Up

    I have searched and could not find much help on my set up issues so I created this new post. First issue is when camera is mounted the rubber eye cup hits the gimbal when tilting down. I have searched and read conflicting solutions. One is to remove the cup and the other claims if you remove...
  13. Giovanni59

    NAZA Startup LED Meanings - Explained

    DJI describes the warm up flashes as 4 flashes, a pause and then 4 flashes again. Mine has been blinking continuously. DJI describes that as radio signal lost, which I don't know how that can be. I wait sometimes up to 10 minutes and then I get the regular flashes. I did that on my "last"...
  14. Giovanni59

    DJI Naza-M v2 Assistant not working on Windows 10

    I believe you have to enable the administrator account & login as administrator to install the driver.... http://www.ghacks.net/2014/11/12/how-to-enable-the-hidden-windows-10-administrator-account/ ---
  15. Giovanni59

    DJI Naza-M v2 Assistant not working on Windows 10

    Yes I did, I'm just having a hard time remembering how I solved it. Having a senior moment, sorry. It had something to do with drivers
  16. Giovanni59

    FAA Announces Small UAS Registration Rule

    I've searched and can't find them to download
  17. Giovanni59

    FAA Announces Small UAS Registration Rule

    It says if you are using sUAV for commercial purposes you have to register by paper. There is a link to do so and it brings you right back to the standard way of registering. Has anyone figured out how to get the forms to mail in by paper?
  18. Giovanni59

    FAA Announces Small UAS Registration Rule

    I am glad for this, I have been wanting this to become official so it differentiates us from the amateurs. Seems pretty painless and brilliant to have one registration number for all the UAVs. Are you sure the government planned this? Seems too logical for them.
  19. Giovanni59

    NAZA Startup LED Meanings - Explained

    OK, I left it on the driveway blinking away and came in to post this and when I went back out after about 10 minutes it was blinking the regular leds. I guess the continuous yellow was really just the warming up signal. can anyone confirm that the warm up flashing is a distinct 4 flashes with a...
Top