Search results

the wing uses the same mount i picture, the slide in foot mount, flat

you need to slide the red wire out of all four esc's, can flip it back and heatshrink if you wanna not "cut the wire" , the bec's are fighting each other Slide em out and try it, worse case you gotta slide em back in but that's a known problem. That big square black thing with the flashing...

had to use a dab of shoe goo on the frame where it went over that gap for the battery strap but only because the front edge of the tape had 1/16th of a inch on the front tab past the gap and i didn't trust it to stay. Even with vibrating props it changes the frequency alot lower and less. My...

It's the eagle tree gps with the osd pro and the v4 logger..... I thought about trying one, but been pretty satisfied like this. It's gonna be fpv and it kinda gives me a little more aspect of how big i am and what it's gonna go through, i may still try it if that doesn't work out when i go for...

I pretty much got mine dialed in. Wound up getting the throttle trim switch just turned off, then the naza calibrated the throttle at midstick perfectly center no matter where the trim switch had been set from flying other stuff, then it flew bitchen, has since The big trick for me and dealing...

that yaw is greatly affected by perfectly balanced props too, when the motors can't smoothly up and down rpm makes em fly goofy It's spoiling ya, i know what you mean...... I keep sending mine up 200-300 feet and descending is such a weird feeling trusting it's gonna stay right side up

make sure where it says receiver type at the top of the screen you calibrate at is set to traditional and not d-bus You have to calibrate a couple times to get the error to leave once you get it going

it would be a good idea to get it running a little smoother, they fly alot better

dunno what to say...... i've had brownouts in other rc lipo stuff in the past that were cold solder joint related, but have also had great solder on clone deans and had em just not make connection at the other end at one point or another that would come and go. i'd definatley keep screwing with...

heres a quick vid of how the boards work

i got the 306b, 2 dell 750 watt ps wired in series for 24 volt and it'll blow through 6 6s 5000 mah in nothing flat, have ran it at 30 amps, that's the icharger paralel adapter limit. Next time i need a board, i'll look into that fma one, i like the independant fuses and 40 amp rating they...

no you don't have to. That is for esc's that have a bec built in and your wanting to run an external one. naza comes with the external so they made there esc's without the bec in em. Your all set, have fun and keep her shiny side up

man, slow..... 5000 mah pack would be at or less than 1c rate I had a 50 watt single output to start with, had a maximum rate it'd do on 3s around 4.4 amps. If i remember right, the max amps is affected by cell count, not the mah. if i had to guess, with a big enough power supply it'll probably...

the wife and i after 20 years decided to start a familly, i know..... unfortunately the hunting thing was the first thing to throttle back. it's kinda for the better though, they had a great run and this will help em live out a somewhat normal retirement without being taunted by there...

thanks, i spent 5 years not walking in one various form or another. 10 surgeries, MRSA, kinda been through the ringer these are hunting labs, the ribbons are senior hunter passes at AKC dog games they do. you get 4 passes them move onto the next level. This was about as far as i went with it...

I got into rc around 12 yo, ma got me a kyosho frogger, and it pretty much never stopped form there, just progressed into a snowball. raced off road 1/10th my young adult life, then started working on helicopters at a local airfield, and the next natural progression was into rc helis. it took a...

gains,,,, whats yours set to?

i use intelligent, mainly so i don't shut if off by accident

i don't see a 2.4 rx like your asking...... everything is fm.... is the jr synthesisized mod 2.4? the extreme link thing is a module that fits the back of the radio like the jr one mentioned above spektrum 6210 is 2.4

flies good..... heres a direct link to the download, naza assistant 1.2 http://www.dji-innovations.com/files/naza/NAZA_Assistant.zip