Search results

yes, i haven't seen the logs but i'm guessing the draw was a hair bit lower than apc slofly 10x4.7, but not loud at all and super smooth to film with

just tried a clip in 1080p medium, think is 120 degree and it's jello free. that really changed everything. the motors seem to be cold, even on 4s, weird. i'll put together the data from the logger and the 2 clips shortly, one 3s, one 4s

they were really fast, i ordered at 8pm and had a tracking number shortly after, became live the next morning. just wish they had priority mail. they charge a handling fee, kinda strange but worth it just flew em, uploading the vid now. super quiet, smooth, and from the previews i looked at...

they have left and right,,, these remind me of apc electric. There not perfectly balanced, but really close

that's dissapointing. it takes forever to load when it works, but once it's up on nvidia 3d it's off the hook. is stereographic3d enabled in the driver? Do you load full screen? might try not full screen, makes it not turn on 3d till full screen

http://www.v-eastonline.com/categories/Graupner-Prop-Shop/Graupner-E%252dProps/ bolt straight on, i'm balancing up a set to fly on the dji motors now

what video card do you have? how old is the pc?

man am i excited, figures it'd rain today. look what came in the big brown truck today. Still waiting for them to restock there prop adapters so can run the suppo motors, but this will get me going. Grabbed a spare of each, if there still in stock when order the other two adapters, might brap...

i tried to do it today to get a 960 for the front of my quad,,,, they're out. tried

Wow, not only did it come with the new cockpit and follow mode, it's full blown 3d with nvidia stereographic3d. I got stuck playing it till late in the night. the gaui 330 with active flight controller is alot like a naza on a 450. self levels

I'm flying the 4c 3000mah 40c the last couple days. i like the fat wires and lower internal resistance they have in the higher c rating and it's not much more. These are the exact same size as skylipo 30c 3s 4400 mah. It's flying with gopro, fpv tx, eagle tree osd/logger/gps and is flying 10...

cool, i'll try that before i send mine back, not really looking forward to being without it http://gopro.com/support/hd-hero2-firmware-update/ If you already have the gopro cineform software installed, just plug in the camera and it'll update

the ar8000 will not work at all without the sat, it'll light up, but there will be no output. it is dsmx native. the early releases of the dx8 came with a sat that said dsm2, but was really dsmx, sometimes, sometimes not. the dsm2 sat will bind but not light up or work when bound to the ar8000...

Phoenix just released v4, it has cockpit view and unlimited 3d scenery. downloading it now to check it out, but this is what i've been wanting.... now if i was smart enough to figure out how to get it transmitted into my goggles i'd be stuck in my chair for a while...

you mentioned the rx not lighting up nor the sat......... is it lighting yet? when you plug in the naza to the computer, it isn't going solid green? The thing flashing orange like that happens till you get the atti/manual mode programmed, but you should see the bars move with the stick input...

is the led lighting up when you plug in a battery?

awesome, looks good. is the camera staying pretty steady there? is that the built in rx on the goggles?

try it ..... bet it'll work.

mine does that too........ you cause the error from screwing up the calibration first time around. like when you hit calibrate and the sticks aren't moving the bars and to a point where you centered em and hit finish with them all in the green. anything else causes that error and it takes 2...

yours is showing all kinds of sign of "weird" binds but won't light when booted...... if the wires on the rx are upside down, it'll bind and then without bind plug, booted wants to flash like it needs to bind so thats out assuming you got the bec wire in X3 and LED in the proper orientation...