Search results

if the craft gets picked up by the arm alot you can crack a motor wire too. You can find that by starting it in your hand without props and wiggle motor wires. it takes all three or it studers and doesn't spin

faast system?

boris, what video signal are you using?

guess so...... this is the layout of the one you watched int he video, like i said, just got it not alot of anything on the side, but neither were the first two of these......

it's written on the specs for your motor.......under normal, the heavy load is 3s with 13's, says good for 3-6s,,,,, 370 watts is alot

you gonna run them 4s with 11" props?

guess we made our own thread about it.........

that doesn't sound like a battery.... a burned cell like to show a hundredth or two right off the bat different, but sags sitting still kinda fast. you'll look at it in 3 hours and it 4.16 and falling as it goes. was it hot when you flew?

voltage is a pretty big deal. i had horrible jerkiness and got it to where with post stab can almost clean it up totaly unnoticeable. i have the digital hitec too, i tried messing with dead bands, tried slowing it down, only thing that worked for mine was hv servos with 6v, had tried 7, tried 8...

one thing i learned the last 5 years with rc is helis have one of the worst resale values there is...... usually something gets put together, used lightly, worth half.... not rc helis,,,, about 1/3 if your lucky. MR's have a way better resale value, fpv gear is amazingly valuable in any state.

you gotta get the gains set, then if it wobbles we can trouble shoot mechanical problems but yea, this aint the easiest thing int eh planet to do succesfully. labor of love, don't forget

2tall, is yours a spektrum? same exact model or a different one? just curious, keeping it in the memory bank

theres some goods in there for that money.... i was surprised they took so long to sell

where are you at james? look through here page 19 and 20, that's the deal with gains http://download.dji-innovations.com/downloads/naza/en/NM_User_Manual_en.pdf if you do that and not get a response, get us a movie to see whats going on. the description leaves so many interpitations

that one doesn't measure IR, that's a sure way to tell. Are all the cells still balanced looking? is voltage cuttoff enabled?

that is sweet if it works

na, i agreed it was just for me. now if somebody asked trappy if they wanted one and he said ok that'd be another story

there last cam, built into goggles

do you have a icharger or fma brand? when batteries are stored there are two major factors, being stored charged, and heat. Idealy you want to store your packs with 3.7v and the colder the better but not freezing. alot of my friend use the produce crisper. the most damage comes from storing...

that's what i see