Search results

  1. kloner

    F450 at 1900 grams, getting hot, should I swap motors?

    I've heard that common motor materials are good to 160f,,,, scorpion claims to be good to 180f and that's suppose to be "special"
  2. kloner

    F450 at 1900 grams, getting hot, should I swap motors?

    not hot, but after 10 minutes flying around in 105-110 degrees, they werent ambient. i could put a finger or hold my hand and not think it was gonna burn me by any stretch. no smell, nothing out of the ordinary. i measured a couple times with a laser gun and was 130-135 in 110 degree temps...
  3. kloner

    F450 at 1900 grams, getting hot, should I swap motors?

    there gonna be $50-$60 a motor, or there abouts. He says pricing were gonna like, but the deals i've heard giving pro staff makes me think that direction. super nice You could get better flight charecteristics for a thin cf leg,,, $20 for a set ot there about. mine looked like this at first...
  4. kloner

    Failsafe with no GPS locked (with no satellites found)

    it should fall into atti failsafe, means it'll hover then land when power gets low where it's at, at least that's my understanding, haven't done it,,,yet. naza comes without gps and is what it does without one installed or if sat is lost, falls back to atti modes method of madness
  5. kloner

    F450 at 1900 grams, getting hot, should I swap motors?

    those are 1534 kv,,,,,,, The guys from tbs are selling this motor set that they get from rctime,r but these are the 750kv, that's 4s on 10" props and suppose to be more efficient than how i do the 8 and 9" on 1000 kv... http://www.team-blacksheep.com/products/prod:750kv_30aesc i am pretty sure...
  6. kloner

    F450 at 1900 grams, getting hot, should I swap motors?

    This is a video of the 9" props on 2814 suppos with a gimble, comes in at 2400 grams flying, 2800 if i strap 8000 mah to it's back This thing does 60mph in atti,,,,,,,,,
  7. kloner

    F450 at 1900 grams, getting hot, should I swap motors?

    i'm guessin all the assumptions arent true. nothing noisier on any of em, props are what you hear, different props make different noises no, rctimer as in china...... of course them are nice but christ, for teh price of two i'm getting way more bang for the buck for all four with the graupner...
  8. kloner

    F450 at 1900 grams, getting hot, should I swap motors?

    that's the weird part, depends what frame there on. with my custom frame project, i get 12-14 minutes on 3000mah packs,,,,,, but on my Discovery i get 5-6 minutes....... all the same kinda flying, full forward on the cyclic this is the suppo 2814 on 4s with 9" props,,, the entire flight and it...
  9. kloner

    Overlapping Propeller Designs

    i see you got a motor higher then lower on the same plane. i was asking if you made one motor up, one down, but overlapped if it did the same thing
  10. kloner

    F450 at 1900 grams, getting hot, should I swap motors?

    you are up there at or near "the line" If you wanted to stick with 3s and get double the watt rating, i'd go with this http://www.altitudehobbies.com/brushless-motors/peak-suppo-motors/brushless-motor-peak-450-35-28-1000kv-suppo-2810-12 I fly em at 2200gram, 4s and 8" but there like dji motors...
  11. kloner

    Overlapping Propeller Designs

    rob, out of curiosity, does having the motors on the same plane, not one top, one bottom make a difference with overlapping like this? hybrid coax like does it take away the ability to get those d/l calculations to your liking? i've ran the kloners frame and a discovery frame. Two are almost...
  12. kloner

    sun on the barometer

    tell him aobut the thread and we can't get ya figured out. What a pita....... turn yours on before it leaves ya and look at the right side, opposite the side were talking about covering. you can see three distinct leds on one of mine, the other looks like just one. Wonder how many batches or...
  13. kloner

    sun on the barometer

    this gets stranger and stranger.... fired up the one i've had since last december, been in the water, flies like a dream. It has a green light booted up, side where i see three colors on one has only green lit........ ,,,,,, wtf do all these lights mean? any of you naza guys following this, can...
  14. kloner

    sun on the barometer

    Brett, whats the comment saying your naza is lighting up red at rcg? from a light inside the case? edit, just looked at mine and bigger than crap has a red light, looks like red,yellow and green shining barely on the right,,,,, i'll go look em all over
  15. kloner

    sun on the barometer

    that's right...... just paid $400 and a 2 year contract for a 4s,,, ah well, dam the luck Dave, that's just about perfect!
  16. kloner

    sun on the barometer

    is something happening in town? i got the kids at grandmas today so i've been scraping the kid layer off my house all mornin
  17. kloner

    Overlapping Propeller Designs

    wow.... your in no mans land, never seen one like that...... sweet
  18. kloner

    sun on the barometer

    just noticed this posted in the rcg thread
  19. kloner

    Overlapping Propeller Designs

    are you asking about coaxial type setups? unfamilliar with the term overlapping Thank god that was spreading feet and not spreading something else
  20. kloner

    fpv antenna question

    You will want to keep the entennas seperated on the tri pod. usually we measure stuff in wavelengths and usually at least one wavelength of seperation is the norm for most antennas. the 5.8 wave is 3.33333" ..... and so on. honestly, i've never seen this done, keeps us updated. Yes the...
Top