Search results

sisco, discoveries are in stock at getfpv.com now all futabas love to be changed from 2.4 to 433 via EzUHF....... it plugs into the trainer port. I'd always stick a battery external to the ezuhf when used so don't worry about the voltae coming out of the port. When were talking futaba and now...

i sent lou a message to see if he can get us a way to reset this pig..... were gonna need to know how if this is the new firmware and what there gonna stick with for any time You know,,,,, i just remembered something. one of the big deals or improvements to this firmware is that it accepts...

i'll come if that guy with the free energy motor comes

if you have a servo and battery you might check out the radio and just confirm it's working right and that all channels are working move the servo to each port and move a stick switch or knob

turning off the voltage monitor makes it stop?

is it set to 4s and have a 3s installed? is the battery charged?

all of these electronics will reset from being shorted, even a receiver. as long as the receiver lights up like it is bound your golden but if powered up theres no light then it came unbound. Just because it was bound one day doesn't mean it still is the next Naza needs the failsafes set in the...

you can pre order now

if it's new and under warranty you want to leave it alone and send it toy our dealer. if your gonna eat the warranty, do what you want. there $16 to get a new one when we say they come apart, it where the plug goes into it, the guts come flying out the front with the plug when removed. if you...

yea, i'm watching that page like a hawk, says ships early oct........ I'm praying it'll be compatible with naza sooner or later weird they put that in the AP controller when all the fpv guys use naza. do ap guys use or want osd's? it is on almost every fpv anything

no doubt in my mind your problem is the sun on the barometer deal bro. it's in the current batch of nazas shipping right now............ http://www.multirotorforums.com/showthread.php?5819-sun-on-the-barometer there is a link in there to the rcgroups thread, it's all the same crap,,,,,,, it's...

5.8 tom?

that's right, the unbound part makes em beep like that too yuri pulled his vu's apart three times i think. his wire had a little extra metal or somethin,,,,,,, i've screwed up and walked off with these plugged in alot,,,,,,,, just unplugs and i do a self asskick

you need to reset this thing...... whos your dealer? I'm not totaly familliar with the process, but i think it's to short two pins together on the naza output, but it needs the right two, your dealer should know that makes it completely unprogrammed though and needs to go through the whole...

it is getting power from the three pin thing, red and brown usb port isn't working, help me out here.... explain. are you turning everything on, then plugging it in to the pc? is it windows? does it do the "usb driver" thing, should be listed in the device manager as a device like a printer or...

if it is simply loosing and gaining altitude the simple problems are making sure the throttle is at midstick in TX Cali when you hit finish. not centering the green line on your screen, centering the stick on the transmitter. the closer to 50% the better or the gain is too low on...

you got that right.........

the latest software asks you to update the firmware everytime, ignore it, hit ok because you did that, it reset everything you set so go back in assistant, go over all the settings all the way down the list again. hit save. if any errors are flashing at the bottom, hit us back with what it is.

what time of the day are you flying? is the naza exposed to light?

good info, thanks a million guys. I'm pretty comftorable and kinda understand photoshop, been using it for years to take extremely horrible pictures and make them lit well enough to draw off for our business. laying around in the dark taking pictures of migratory birds landing without a flash...