Search results

I've ran the dji esc's from the start on my 450's, the only time i've had a problem was the rc timer stuff. i'd leave the dji esc's with any motor swap... mine got the 2814 and 2810, they recomend 40 amp for a plank, but in fpv flying them in atti, i don't even get into 15 amp draws per motor...

them guys will make anything you want and label em however they'll sell

welcome dad...... your disorder sounds familliar, don't tell my wife about it. if she finds a name for it i'll be done

I got my orientation from plank flying,,,,,, that went down the 3d path. once your rolling, hovering, crashing and tossing it back up right after, it happens fast. eu EPP is great for that learning from something that breaks when you screw up really slows it all down. sims are great if you can...

i had a 330 i moved my 2215's to but i tried the rctimer 18 amp esc's........ mid flight if you did anything but hover it did the same thing. That was cured by a new esc.......

the super high end belt and cogs i see on these are from here https://sdp-si.com/eStore/ we use similar ones in large scale heli, that's where we get em. one word of warning, they do the $18.00 + $5 s/h bit, but if you ever try to send something back just out it in your drawer and hang onto it...

it all looks exactly like rctimer electronics

I think what were seeing is competition within the chineese,,,,, dji vs klones

the girls sure like that thing........ it's so cute, hahaha

that's what i'd of done. soldered is soldered

basic is 120-190 on ele/ail with a dial,,, 130 vert/rud and 80 atti you understand that part about not messing with a bubble level and to mess with the problem? reading your reply makes it sound like it's suppose to fly level if the things bubble level...level. that's not the case, that's how...

opposite, you bought this cool failsafe feature in an auto pilot flight controller and no way to engage it when you need it,,,,,, when the thing looses signal. just get a new rx, ar7000 or higher....

that was recently noticed and posted....... the leading edge should turn into the wind white is the front that should be the same direction as yours for a quad with naza

most likely the firmware isn't supporting it........ fpv stuff is never in hdmi, that's the oppoosite of no blue screen,,,,,, that mode is all blue screen when signal drops

im not sure, but i didn't mess with a bubble level, i messed with the problem i saw in the sky and made the side it went higher. beyond that, not sure what other way to make it stop a drift. mines probably not bubble level hovering, but it hovers in place without a breeze

that's pretty clean...... looking at the material you linked, is that cmyk so it makes any color? is the whistle hollow? is there a ball inside?

haha, if he stays there into dark, go push him over, grab the bag and run...... big SOB

your recalibrating when you lift the side it's flying towards? keep putting it the same spot on the table each time, you can get it perfect keep an eye on the numbers it shows and move it the right way, you can fake it to each degree it measures. pieces of paper under a leg was a really...

and if you wouldnt mind id like to see something out of a modern printer, not from the manufacturer of the things site,,,,, what yours actually does on your desk the prices have come way down since 10 years ago,,, bet it's better too. I've ran a knife plotter the last 20 years and these kinds...

i've bought some of the stuff made from these but never got into getting one. Scale helicopter guys love these things..... interior pieces, exterior parts, unreal for that kind of thing. i did color printing on vinyl for a while and if this is anything like that where you gotta use it or loose...