Search results

is there specs online for what all there video gear is and channels are?

i never flew dsmx, that might be better,,,,,,,

http://www.tjinguytech.com/my-projects/diy-24v-47a http://www.tjinguytech.com/my-projects/server-ps there unreal, holds 24 volts at 30 amp charge rates, draws 16 amps at the wall on 110. if you got a 4 plug wall outlett, one plugged into the left and one plugged into the right will split that...

there are two main ones we all use.... the most bang for the buck is the dell poweredge server ps 700 - 750 watt, it's these http://www.ebay.com/itm/DELL-PowerEdge-2850-Server-Power-Supply-700W-NPS-700AB-A-R1446-/180965103952?pt=US_Server_Power_Supplies&hash=item2a225c5950 theres also an hp...

the 7000-7010 and up have the multi channel failsafe settings,,,,,,, 6200 is throttle only the gps is enabled by that 7000 or higher receiver showing naza it's lost signal with you.... it'd just be more money leaving you behind without the right receiver. if your on the cheap, check this one...

those are esc features. it shutting down with loss of signal is it's internal failsafe. it's the way most everything is, when it's not setup like that people complain it's unsafe the slo down at 3.0 is a problem, that will eventually shut one motor off if the LVC is all turned off in WK and you...

looks pretty good. when you get fff that motor will make her wiggle..... everything over 250 watt seems to from what i've tried

being he just bought this, does anybody have links to older versions? he doesn't have the older versions in his pc from the ride along the way

when everything is on and it's plugged into assistant with a green motor control light on, move your radio sticks while looking at tx cali..... you should see everything move

that gimble was really hopping around... dji gimble control?

or use an old version of the assistant. all the units sit around forever and they get the latest firmware when you fire em up like your doing. Best of my knowledge the latest wk stuff is good

Just remembered what playing with trim did,,, it was almost a year ago i was trying to figure these out. What makes atti mode fly flat and level destroys manual and vice versa. I've always left the ground in manual and that didn't work for me. Atti has such a disconnected feeling i don't like...

tools-update firmware

It's the wrong way to deal with any flight controller...... you make it see level then everything you have in your radio is set to zero, nuetral. Naza will misbehave on ya if you try to make up rules with her. IMU cali makes it hover straight no matter how crooked the install, that's it's...

if she'll listen to any of it shes a keeper...... flown single rotors much?

it comes on fast, especially if you got place to practice. my first fpv flight was easter...... first plane fpv flight was labor day weekend But i had years of single rotor experience and a year of 3d plank flying

This is on a gimble controlled by naza so it has this bounce the post stab gets rid of. hate it, already tore it off in favor of the sony as-10 back to solid mount Fabien, it is here...

I'm not sure about that,,,, mine shows both a row of numbers that's where it is sitting in relation to level then a row of numbers called acceleration, that'd be the accelerometers. So those do move cause your moving them, but the gyro part is what gets reset to flat even if it's not flat on the...

I push the cyclic full forward in atti,,,,, when it lets off i just barely back off trying to look forward a little ways then i push forward. Swear i'm gonna bend the stick. Next trip out think i'll give man a shot. I'm just always so overwhelmed it never crosses my mind. Theres so much going on...

the actual act of going out over surfers doesn't matter, just stay away cause they like throwing water and crap at ya. We have an area in carlsbad that's a official flying spot that's on the cliffs overlooking the pacific, was just there last weekend, killer little spot called daves beach you...