Search results

Hi Diego, this isn't really a post area others than me will find. Might try it in the main forum area

I've got this and an av200...... 200 isn't setup yet, but it really weighs alot....... this thing is skin and bone like this3.6 kilo, 3400 watt, suppose to go vroom

i was gonna mention that monty.... is that launcher like yours? the big trailer one?

hahaha,,,,, that is the XY8 with an av100 tilt only and nex-5n It was so windy. It went from a north 10-15 to a west 13-16 then would drop off, then blow. Rained a bit later

I just use the icharger 306b with a pair of the dell server power supplies running 24 volts, 1400 watts of power. The charger pegs up to 30 amps on up to 6 packs. I fly all pairs of packs now so it is usually 4x 4s 4000 to 5300 mah at a time, it's like an hour to balance charge them out each...

put naza inline with the intersecton of the arms, forward of that mark..... everything on.... it'll do it from 370-450 gram pack, 3300-4000mah 4s, seems like more weight it has the faster it goes tilted up

ok, so take and grab the frame by the sides so it pivots fore and aft unrestricted. hold it right at the mark trappy has on it but it'll be the top plate. let it hang free, the model should look like it's flying fast forward flight in your hand hanging nose down 45 degrees, that makes any...

only thing that sucked for me was the file sizes....... but leaving them on the camera and processing them from the cam made it alot more tollerable. it's a 2 gig file every 7 minutes. after protune is on and it's compressed that file is 500meg like a normal cam would do

when you fly FFF you want to hold the model at that mark, at the top of the frame is fine and the model should settle into a 45 degree tilt forward stance and sit there. the more you want to hover, the more you want cg to settle in the middle of where all the arms intersect and at that point it...

where are you florida? forget where it went this was the last thing i taped on your cam, it's all protune

i got sucked in hook line and sinker, great show

in protune, the color correction isn't done at the camera during recording so it lets the camera run better and gather light and worry about getting it to the memory. then what i do is connect the hero, open the go pro cineform software and hit import straight from the camera, then in step 2 you...

I tend to fly my packs by osd to certain levels, so in my case, it's a pretty simple task..... heres my take on the charge distro setups, there kinda dangerous, i've had several instances when i've plugged in balance leads one pin over, or worse, backwards. When you do it smokes the...

those clone chargers like that are notoriously crappy at balancing, but the numbers your throwing off are what happens when a pack has a high internal resistance, or at least one on the rise. When i went from thunder 200 watt to the icharger, my balancing was night and day different This is why...

the wire is the front 0 deg

All mine were painted, and found if i got the paint too thick it degraded the lock. if you see too many red flashes too long, you know what to do

did you set dual rates? might say d/r, needs to say 100%, if not you might re run the tx calibration

if you want to make it stable, you can load the last firmware to it butt he quality is so good, i dealt with it crashing from time to time. usually it would do the first 7 minutes then crash

hahaha, addidas slacks too.... i even shaved, my daughters teacher didn't recognize who i was when was dropping her off vid from today, my jobs done with old flyguy,,,,,, till next time

Mmmmm, brownies Was practicing running up and down some cliffs today, the real spot we flimed wound up being there camera so naturaly didn't get a copy of it but none the less, for what they wanted this for it's perfect. if you watch the Farmers Open i guess it'll be throughout there. Flew...