Search results

  1. kloner

    Do you listen to audio when you FPV?

    here, here, same here. No music, just me and nature so can hear things that might be a problem
  2. kloner

    Fatshark attitude TX on 4s (which BEC?)

    yea, thats a different deal, get this one http://www.dpcav.com/xcart/Adjustable-Voltage-Regulator-1-35V-Step-Down.html if you wanna save money get this one http://www.ebay.com/itm/250954117473?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 that exact auction ended, but scroll down and...
  3. kloner

    Hoverfly HFP on Ice esc's

    Had some time today with a multi rotor running the black hfp board and castle esc's. when i'd fire up the motors, there was a noticeable lag in 2 or 3 of em, one goes quite a ways into the throttle studdering till it spins. the esc is in multi rotor mode and fixed end points. When i tried to...
  4. kloner

    Fatshark attitude TX on 4s (which BEC?)

    if this is a normal immersion looking fatshark vtx it runs from 6-16 volts and can go straight to a 4s flight pack
  5. kloner

    Never had this happen before!

    I had swapped out some motors on a carbon frame, for whatever reason when i put the ezuhf antenna on the flat of the nut didn't sit flat to the frame and it almost touched. When i fired up the heli i smelled smoke, thought i fired an esc. Saw a faint smoke a few times, i was freakin out. next...
  6. kloner

    superman

    they were horrible, want em? that's what addidas did with it. My boss is still out there flying around the golf course. They wait till tigers at a hole, start a pattern near him, then when he gets near finishing they take it up and to aerobatics and the camera keeps panning to it
  7. kloner

    Futaba 8FG w/ R6208SB

    antenna is inside, 2 of them it also has a blue tooth way to transfer models around. I'll look at mine and see what all is changed. Pretty sure it's just ch 7 has a different sub trim and endpoints to hit manual, atti and gps, i made a return to home mix, you'd have to set the failsafes so...
  8. kloner

    Mikrokopter Video of Mikrokopter out of control

    frightening is the first thing that comes to mind. Take the props off till your familliar and positive it's ready please. This thing will send you to the ER faster than you can look at it. Get a total understanding of mikrocopter or sell that part and get something easy to setup/use
  9. kloner

    Futaba 8FG w/ R6208SB

    yes, i think the air one defaults to an air model when you reset or make a new model, it's two clicks to a airplane mode the airplane one defaults to air mode (what you want to use) and has that ratchet
  10. kloner

    Futaba 8FG w/ R6208SB

    with naza having atti, the air radio is nice because the throttle ratchets and center is center, and easy to find it. You can open it up and remove the ratchet if you hate it later, but it's really good for not changing altitude when rudder input or to just fly through cam, look down and you can...
  11. kloner

    Futaba 8FG w/ R6208SB

    na, tower has em for $269.... free ship no tax Setting up naza is about as easy as life gets on any radio. Alot of the AP guys like the fg for the levers and stuff for gimbal control. You could go either way, but if your leaning towards fpv anything more than 8ch is overkill, 8j is more than...
  12. kloner

    + and - pads on flamewheel lower frame plate

    yep, there really nice. top and bottom are pcb and split pos/negative. Think it handles around 50-60 amp current. There should be the same pads at each arm to feed each esc A digi multimeter on the pads orientated red pos, black neg should show a positive voltage, if so, your set. negative...
  13. kloner

    Please help! Issues with transmitter and dji 450

    go to page 22 and read about changing modes. left throttle up and down and left rudder is mode 2 then you just want the radio left alone with a bone stock nothing done settings. Go to naza and reverse the controlls if needed. setup your modes man atti switch and your all set. if you have gps...
  14. kloner

    Hey Bartman!

    as long as it don't start smellin like one were golden
  15. kloner

    Futaba 8FG w/ R6208SB

    and a $150 receiver to make the kit come together. the 8j rx's are $45...... how many models you got? If i was never going to upgrade to long range uhf and i thought i'd need more than 8ch then i would, but mostly just on looks and a couple extra channels. S-FHSS is the best for range. I love...
  16. kloner

    Mikrokopter Video of Mikrokopter out of control

    and you have to calibrate it properly. You have the most dificult FC there is to setup.
  17. kloner

    Futaba 8FG w/ R6208SB

    frsky and futaba don't bind. only thing futaba about that is the sbus signal coming out of it, sounds like plugs into other sbus stuff...... the fg has about a mile range, receivers are super expensive for the fasst algorithym royalties. i personally really like the 8J, it's s-fhss like ezuhf...
  18. kloner

    How I will be spending my Australia day...

    ah hell, you'll be drunk anyway, fly it.
Top