Search results

I run 2 different systems in whole and part. immersion 5.8 600mw transmitters are great but limited in range, need cp antennas to use in flight. depending how high your noise floor is at current, this may or may not be enough. Alot of people are using and having succes with BOSS CAM...

the set for my sj8 came in yesterday,,,,, they are nice looking. Wires seem small, but i can get past that if they work.

it smokes the pcb if you miss anything, and that's your frame The worse part is continuity test don't make since cause of the current sensor back feeds.

I have, it's not bad but not the best. dedicated cams have alot of things that make it not so much HD but are able to look at sun and see the ground, etc. the other thing that happens is when you record in hd formats, it displays with black areas top and bottom like opposite letterbox. it makes...

not coming down is usually a sign of over propped. whats the throttle stick position when it hovers in manual?

From what i've seen, it is usually mechanicaly related when you chase a problem with a gain and nothing changes. An atti gain can't be too low, it is just slower to return to flat after letting go of the stick. high atti gains make a nervous look to the film from on board, lower gains are...

Welcome, where abouts are you?

On all my dji rigs, atti set to 80 is most comftorable. the oscilation sounds like too high of gain, lower it 10% at a time. it'll go from oscilating to loose.

take a small set of wire cutters and trim each link from core to board till it pops off, then heat each one of them pins left behind and remove them. if solder is left behind, heat and tap lightly to knock it off the frame or you can use a desolder wick like they sell for this.

Is the Droidworx distro board pretty good? does it need anything more? It'll run somewhere between the 3515 and the AMP epic500 motors, both around 700 watt x8 8 gauge power leads and them PRC6 connectors, right?

go pro sells a seat post bracket that is pretty much what your asking with alot less fussing with stuff, clamp and play http://gopro.com/camera-mounts/handlebar-seatpost-mount

Worse case TiVo it then film that

Those are pretty. A full blown FPV type quad with 28mm motors, gopro, vtx, dedicated vid cam and 4000mah 4s weighs 1.6 kilo

You gotta run em through cineform, I can't see plugs vid but most likely like that. Apply protune and it comes to life

In looking at motors for this thing, whats the prefered HL motor? is the tiger 3515-400 a decent way to go on 6s?

2.8 is like a hero view,,,, i prefer 3.6 it's a little more zoomed, but not sketchy to get down low and close to stuff. Any tighter and it's good for really high flying about it you want the pz0513 with a 2.8 if you like proximity, looks like this flying it

Good luck dude! have fun, knock em dead and make us look better than we are. Glad they asked you, your smart enough to do this right and your use is a perfect example of why these things shouldn't be scary. I get alot of attention from the places i'm flying, most of it is totaly positive, then...

Try either atti or manual mode. manual is more like a regular plane so you make your move and let go of the sticks. it's usually alot faster, but you loose the altitude hold at half throttle part. and that's alot of what nazas all about

It's pretty nice. Like it better than the 8fgs...... the rig has one of each. I personaly own the 8j and this one has 2 extra dials and weighs about double, twice as thick. the 8j is my favorite, i've never been a tray or strap guy and it's like a lighter gun or lighter pair of shoes, more...

Changed out the esc in question and put some 10x5 props on it,,,,,,, no gimbal, no weights and it looks better, but a similar deal. in manual it seems to run fine, just unstable. Put it in atti and it does all that fancy cutting out and unstable. I just tore it down to look at the motors. The...